This KATA Door Lock Installation Kits include an adjustable guide template for easy and exact drilling with snap-lock arms for selecting door width and backset as well as two hole saws and an arbor with a pilot drill. The guide template fits 1-3/8-inch and 1-3/4-inch thick doors and 2-3/8-inch and 2-3/4-inch backsets. This kit is designed for use on wood doors and is constructed out of high carbon-steel.
Save yourself time on your next door lock installation. Use the KATA KT20531 kit. It has most everything you would need to cut clean holes in preparation for your locks and deadbolts. It’s an all-in-one template that can be installed in seconds.This will work with almost any 1-3/8" or 1-3/4“ doors. With the included saw blades and arbor bits, there is nothing extra you need to pick up, save for a drill / driver to put it all together. These saw blades are made of carbide coated teeth backed by reinforced steel to prevent wobble so you can get a clean cut every time. Cut into your door, and clear the accumulated plug out in seconds when you’re finished.
Notice: DO NOT DRILL THROUGH THE DOOR ONLY ON ONE SIDE.
YOU SHOULD DRILL BORE HOLE HALFWAY ON EACH SIDE OF THE DOOR.
| For Soft Wood | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
|---|---|---|---|---|---|---|
| For Metal | X | ✓ | X | X | X | X |
| Quantity | 4PCS | 4PCS | 18PCS | 12PCS | 7PCS | 6PCS |
| Hole Saw Material | 45# Carbon Steel | M42 HSS Bi-Metal | 45# Carbon Steel | 45# Carbon Steel | 45# Carbon Steel | 45# Carbon Steel |
| Size | 1-3/8" - 1-3/4" | 1-3/8" - 1-3/4" | 3/4"-5" | 3/4"-2-1/2" | 1'' - 2-1/2'' | 1-1/4" - 2-1/8" |
| Design of Slot | Standard | Standard | Standard | Standard | Large Chip-clearance Slots | Standard |
| Cutting Force | Standard | Standard | Standard | Standard | 5X Faster than Standard Hole Saws | Standard |
| Wood Block Removal | Standard | Standard | Standard | Standard | Easy | Standard |