|
|
||||||
|
|
|
|
NOTE:
1. Please check the same FCCID and the same keys as your key.
2.If you don’t know your model, please contact customer service to confirm.
DESCRIPTION:
1.Fixed screw, anti-drop and more durable.
2.The button icon is clear, durable and non-fading.
3.Complete key fob with electronics and batteries.
4.Complete models, drop-proof ,Tightly stitched, metal tail buckle.
SPECIFITIONS:
Frequency: 315 MHz
Battery Type: CR2032
3 Buttons: Lock, Unlock, Panic alarm
FCC: L2C0007T,10335583
PACKAGE INCLUDE:1Pcs Replacement Keyless Entry Remote Fob
VEHCLES COMPATIBITY:
2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet Colorado
2001 2002 2003 2004 2005 Chevrolet Venture
2004 2005 2006 2007 2008 2009 2010 2011 2012 GMC Canyon
2006 2007 2008 2009 2010 Hummer H3
2001 2002 2003 2004 Oldsmobile Silhouette
2001 2002 2003 2004 2005 Pontiac Montana (will not work on 05 Pontiac Montana SV6)
PROGRAMMING:Self programmable(Please refer to the programming steps or programming URL below)
a.Here is the website link Free DIY Programming Instructions:https://www.programyourremote.com/
b.How to Program a 2001-2005/Pontiac Montana/Chevrolet Venture Keyless Entry Remote Fob Smart Key?
Step by Step How to Programming Instructions:
IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be using on the vehicle. Once you program the remote. all previous
remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.
1. Remove the key from the ignition.
2. Remove the "BCM PRGRM" fuse from the fuse panel. Use the legend on the fuse panel to properly locate the "BCM PRGRM" fuse. Fuse panel is accessed by opening
the front passenger door.
3. Close all of the doors.
4. Close the liftgate.
5. Insert the key into the ignition, and turn to the ACC position.
6. Turn the key to OFF and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.
8. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.
9. Repeat step 8 now for each additional remotes to be programmed including any existing remotes.
10. Remove key from ignition.
11. Install the "BCM PRGRM" fuse back into the fuse panel and test remote(s).
Item Specifics | |
---|---|
Programming | Self programmable |
Frequency | 315 MHz |
3 Buttons | Lock, Unlock, Panic alarm |
Packing | 1 Pcs of Remote Keyless with Battery |
Warranty | 1 Year |
Custom Bundle | No |
size(cm) | 3.00 * 2.00 * 1.50 |
Weight | 0.02kg |
Battery Type | CR2032 |
Color | Black |
Conition | New |
FCC ID | L2C0007T, 9364556-4575, 10335582, 10335583, |
Other Part Number | 10335585, 10335586, 10335587, 10335588 |
Manufacturer Part Number | VA05710801p |
Brand | vap-autoparts |
Modified Item | No |
Surface Finish | Black |
We usually ship within 1 business day of receiving your payment.
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We only ship to Paypal confirmed address, please make sure that the address is correct before you check out.
We accept to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
We offer a 30-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased.
The process for returns:
1. Contact us via eBay with any concerns or issues with the product you received.
2. Begin a Return Request on your eBay account.
3. You will be sent a return label via eBay
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Store Cat. |
For 2001 2002 2003 2004 2005 Chevrolet Venture Keyless Entry Remote L2C0007T
NOTE:
1. Please check the same FCCID and the same keys as your key.
2.If you don’t know your model, please contact customer service to confirm.
DESCRIPTION:
1.Fixed screw, anti-drop and more durable.
2.The button icon is clear, durable and non-fading.
3.Complete key fob with electronics and batteries.
4.Complete models, drop-proof ,Tightly stitched, metal tail buckle.
SPECIFITIONS:
Frequency: 315 MHz
Battery Type: CR2032
3 Buttons: Lock, Unlock, Panic alarm
FCC: L2C0007T,10335583
PACKAGE INCLUDE:1Pcs Replacement Keyless Entry Remote Fob
VEHCLES COMPATIBITY:
2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet Colorado
PROGRAMMING:Self programmable(Please refer to the programming steps or programming URL below)
a.Here is the website link Free DIY Programming Instructions:https://www.programyourremote.com/
b.How to Program a 2001-2005/Pontiac Montana/Chevrolet Venture Keyless Entry Remote Fob Smart Key?
Step by Step How to Programming Instructions:
IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be using on the vehicle. Once you program the remote. all previous
remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.
1. Remove the key from the ignition.
2. Remove the "BCM PRGRM" fuse from the fuse panel. Use the legend on the fuse panel to properly locate the "BCM PRGRM" fuse. Fuse panel is accessed by opening
the front passenger door.
3. Close all of the doors.
4. Close the liftgate.
5. Insert the key into the ignition, and turn to the ACC position.
6. Turn the key to OFF and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.
8. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.
9. Repeat step 8 now for each additional remotes to be programmed including any existing remotes.
10. Remove key from ignition.
11. Install the "BCM PRGRM" fuse back into the fuse panel and test remote(s).
Shipping
We usually ship within 1 business day of receiving your payment. We do not ship to P.O. Boxes, APO/FPO or Military Mail Box. We only ship to Paypal confirmed address, please make sure that the address is correct before you check out. ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Payment
We accept to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information. For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order. Return
We offer a 30-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. The process for returns: 1. Contact us via eBay with any concerns or issues with the product you received. 2. Begin a Return Request on your eBay account. 3. You will be sent a return label via eBay Feedback
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Warning
Cancer and Reproductive Harm - www.P65Warnings.ca.gov Copyright of VAP-AutoParts. All rights reserved. |