Features:

• Multifunctional OBD2 Breakout BoxOBDII breakout box is used for the OBDII diagnostic link connector. After connecting the car diagnostic tester and the car OBDII system, the communication protocol,power and grounds of the OBDII on-board diagnostic system can be monitored very simply and safely,which is a multifunctional OBD2 diagnostic connector detector.It can be directly connected to the car's on-board data link and easily access the vehicle's data bus line.
• OBD2 Diagnostic Tool Supporting Multiple Protocol Types TestingOBD2 breakout box is powerful,besides diagnosing car signals (such as power/grounding,judging whether car OBD signal reception is normal, etc.), it can also detect some diesel signals, such as supporting CAN bus, K line, L line and PWM protocol testing, supporting multiple types.
• OBD Signal&Grounds&Power DetectionOBD2 breakout box can judge the OBD signal reception.When the decoder communicates with the vehicle,if the yellow light is on for a long time,it indicates that the decoder is communicating with the vehicle,and there is a signal waveform at pin 2 or 6/7/10/14/15.It can also diagnose whether the power and grounds are normal.When the body ground is normal,the green LED of pins 4 and 5 is on.When the body power supply is normal,the red LED of pin 16 is on.
• 16 pins OBDII Interface&90cm CableOBD interface of the detector adopts a 16 pins design,the input jack layout fully emulates the 16-pin layout of the OBDII interface,allowing more tests to be performed quickly and intuitively,you can have quick access to all 16 pin connections during vehicle service and diagnostics.You do not need to directly operate the pins of the OBDII interface.The cable length of the OBDII data line detector is 90 cm,which makes the device connection more convenient.
• 16 Standard 4MM Banana Sockets & Male/Female Header ConnectorsThe built-in input jack can be connected to any type of 4mm banana plug for easy connection to a multimeter or oscilloscope to further measure the uncertain monitoring signal.In addition,OBD2 protocol detector has male and female header connectors,you can place the junction box between the diagnostic tool and the vehicle,which is more convenient to measure the CAN bus signal.
• NoteDo not place a jumper between the power pin 16 and ground pins 4 and 5; Do not use this tool to power up a load devices exceeding 1 amp; Do not jumper pins together without understanding the circuits.

Product Details:

• Manufacturer: ‎DUOYI
• Brand: ‎DUOYI
• Item Weight: ‎12.6 ounces
• Product Dimensions: ‎3.15 x 1.38 x 7.09 inches
• Manufacturer Part Number: ‎QCZDCSY-2PCS
• Special Features: ‎It can detect some diesel signals, such as supporting CAN bus, K line, L line and PWM protocol testing;OBD Signal&Grounds&Power Detection;90cm Cable;
• Date First Available: May 26, 2022