SainSmart General Purpose Photopolymer Resin

Recommended Printing Settings:

Number of Base Layer: 8

Base Layer Curing Time: 55s

Normal Layer Curing Time: 6s

Parameters:

Hardness (D): 80 - 82

Viscosity (25C, mPa.s): 150 - 200

Density (g/cm3): 1.08 - 1.13

Flexural Strength (Mpa): 46 - 72

Flexural Modulus (Mpa): 1000 - 1400

Tensile Strength (Mpa): 46 - 67

Elongation at Break (%): 28 - 35

Please shake well before print.

Keep your room well-ventilated while printing.

Do not touch the resin without wearing PPE.

Keep resins sealed tightly in the bottles, out of direct sunlight and within 15℃ - 35℃.

Do not expose resins to heat, flames, sparks or any source of ignition.