Double Device Stacker Stand with Two Adjustable Slider Bracket Sets plus upper device brackets for Two Devices of different widths.

Narrow device must be on the bottom !!!<<<

>>>Please note this is for devices using standard 5M side knobs not for Icom devices using 4M side knobs.<<>

>>>Please see my other listing with four each 4M KN4P side knobs. <<<

>>>Includes 3Lb all Steel Base and 2 pairs of slider quick release brackets and a pair of upper device brackets plus two sets of knobs in 5M threads.

Kit includes above and hardware if screws, nuts , fender washers , wing nuts all totaling approx 30 pieces. <<<

>>>NO RADIO <<<>>>. Tall STACKER two device STAND with Four Side Attach KN5 5M Knobs and with TALL Long side vertical extension add on extension brackets plus upper device 2 Long Slider Slider Brackets plus 2 shorter slider brackets for lower device. <<<

>>> As with most of my items if you order a 2nd or 3rd unit at the same time for yourself or with a Buddy share the shipping cost order the order will ship for the one ship fee !!! A real potential cost savings. !!!<<<

>>>>I do not combined orders across listings.<<<

>>> Base Stand includes my base & side slider brackets shown as parts in photos or if you have the one piece Uniden base bracket it cannbe used with my side brackets on this 3Lb base !!!<<<

>>>Tall Extension Slider Brackets now have QR slots !

To use QR point them up or not point them down !<<<

<<<>>> For SDS200 Scanner and other radios needing 5M KNOBS !!!>>>No Radio <<<Now Knobs supplied are with larger knob heads as shown in photos without Transceiver mounted. <<<

>>>Custom made here in Udaho aka by Design Services Custom Products in Idaho USA as a single source for this : approx 3Lb steel base 5” x 8” <<<

>>> 3Lb Base Stand with Quick Release Adjustable brackets on my Universal 3Lb Base 6Th Generation All Steel SUPERBLOCK <<<

>>>I also separately offer : Hand microphone bracket for 3Lb Base. <<<

>>>For Uniden and other devices with 5M side mounting ports. <<<

>>>QR Adjustable Brackets and 6th generation 3Lb Base Only. Please note a Chassis Bracket is also called a TRUNNION Bracket. <<<

>>>No Radio or other device included. <<<

>>>To USA units are shipped USPS Priority Padded Flat Rate Envelope with a Carton inside with unit well padded. <>>><<<>>>

>>>Multiple *** Base / Stand Kit Units Ship Same / One FEE. USPS Medium *** Flat Rate Carton will be used for +++ Unit orders at same fee. For Intl Units are shipped Ebay Economy Intl. <<<

>>>Maximum Bracket Width 10.25” or 10&1/4” .

Minimum Bracket Width 4.75” or 4&3/4” .<<<

>>>Slide Slotted Brackets can actually be reversed and attached to multiple mounting holes along the centerline to allow adjustment closer than the 4.75” listed above !!!<<<

>>>Maximum Knob Height at Knob Stud Center 2.125 or 2&1/8” .<<<

>>>Minimum Knob Height at Knob Stud Center .625” or 5/8” . <<>>

>>>NO DEVICE ! This is for a New Design 3Lb Base and 14* piece Hardware and Quick Release Adjustable Bracket and Side Bracket to Device Attachment KNOBS* which are by far the most common size for Icom radios and both sides and back of device attachment. <<<

>>>Please Note this is a new listing and to date I’ve sold over 125 of these very successful 3Lb Universal Bases across several listings. <<<

>>>Not 3D Printed Plastic but 3 POUNDS of SOLID STEEL in Baked on Triple Coat Gloss Black on 4 Ea 3M Anti-Skid Feet. <<<

>>>This 3Lb Versatile Platform includes a multi part hardware assortment of screws, nuts, wing-nuts, and is

Now with New and Improved Base that’s 1” wider for Greater Stability!!!<<<

>>>This Heavy Duty PEDESTAL BASE is now wider Front To Back @ 8” Long by 5” Wide.<<><>>

>>>No Scanner or Radios this listing is for the Base , Adjustable Quick Release Bracket , and End / Attach Bracket to Device Knobs !!! <<<

>>> LOOK >>>This Pedestal has Two sets of holes for attachment screws with centers at 5&7/8” and 2.5” center to center distance for each pair of holes. Plus this 6Th Generation Universal version 3Lb Base has many added holes for Bracket attachment in different positions and also other item adds. <<<