Excellent in service & quality
Shipping at PRIME speed
25,000+ satisfied customers
✅ Cheap ✅ Quality ✉ Shipping until 14h ☎ Telephone service ⭐ Order now ➡ 4x axle boot for PORSCHE 911 2.0 F 912 SET REAR

The original from the market leader GKN (Spidan/Löbro)

Description:
These axle boots are suitable for all Porsche 911 FL and S models with 130, 150 or 160 HP. The set is also suitable for all 912 Coupé or for 914-4 2.0 models. The axle boot set is true to the original and is suitable for the Porsche models mentioned up to, whereby you can find more precise restrictions for the individual models under the heading "Suitable for ". The set of drive collars, fastening material and grease comes from the well-known manufacturer GKN.
In addition to these axle boots, we have a variety of other bellows for air-cooled Porsches in our range. You will also find complete drive shafts and joint sets in our program. for If you have any questions, our customer service is available to help you.

When it comes to quality, we like to rely on the centuries-long expertise of the British manufacturer GKN. The company with its brands Spidan and Löbro is particularly known worldwide for its drive shafts. With over 50,000 employees, GKN is one of the largest automotive suppliers worldwide.

The British company GKN was founded in 1902 through the merger of Guets, Keen and Nettlefolds. GKN is one of the world's leading manufacturers of drive technology components and systems. Under the brand names Spidan and Löbro, various components such as car side shafts, longitudinal shafts, joint sets and sleeve sets are manufactured in excellent quality.

Additional Information:

&#9679 Height: 107 mm
&#9679 Material: NBR (nitrile butadiene rubber)
&#9679 Inner diameter 2: 26.86 mm


Reference numbers:
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.

90133229311, 901.332.293.11, 901 332 293 11
90133229310, 901.332.293.10, 901 332 293 10
113501151
113501151C


Scope of delivery:
According to figure

Suitable for :
911F LS 2.0 130 HP 150 HP 160 HP
912 to '68
914/6Item number: 8417
4x axle boot for PORSCHE 911 2.0 F 912 SET REAR

The original from the market leader GKN (Spidan/Löbro)

Description:
These axle boots are suitable for all Porsche 911 FL and S models with 130, 150 or 160 HP. The set is also suitable for all 912 Coupé or for 914-4 2.0 models. The axle boot set is true to the original and is suitable for the Porsche models mentioned up to, whereby you can find more precise restrictions for the individual models under the heading "Suitable for ". The set of drive collars, fastening material and grease comes from the well-known manufacturer GKN.
In addition to these axle boots, we have a variety of other bellows for air-cooled Porsches in our range. You will also find complete drive shafts and joint sets in our program. for If you have any questions, our customer service is available to help you.

When it comes to quality, we like to rely on the centuries-long expertise of the British manufacturer GKN. The company with its brands Spidan and Löbro is particularly known worldwide for its drive shafts. With over 50,000 employees, GKN is one of the largest automotive suppliers worldwide.

The British company GKN was founded in 1902 through the merger of Guets, Keen and Nettlefolds. GKN is one of the world's leading manufacturers of drive technology components and systems. Under the brand names Spidan and Löbro, various components such as car side shafts, longitudinal shafts, joint sets and sleeve sets are manufactured in excellent quality.

Additional Information:

&#9679 Height: 107 mm
&#9679 Material: NBR (nitrile butadiene rubber)
&#9679 Inner diameter 2: 26.86 mm


Reference numbers:
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.

90133229311, 901.332.293.11, 901 332 293 11
90133229310, 901.332.293.10, 901 332 293 10
113501151
113501151C


Scope of delivery:
According to figure

Suitable for :
911F LS 2.0 130 HP 150 HP 160 HP
912 to '68
914/6

Item number: 8417
  • Messenger, telephone and mail service Mon.-Fri. from 8 a.m. to 5 p.m .

    You can also contact us in the national languages contact by phone.

    Special conditions for classic vehicle dealers and classic workshops after initial order.

    1 month right of withdrawal on all goods.

    Quality promise: We only offer what is good and otherwise point out quality defects.

    Over 25,000 satisfied customers.

    Security: eBay buyer protection

  • Shipping at “Prime Speed”: Monday to Friday, all orders paid by 2 p.m. leave our warehouse THE SAME DAY.

    In addition to standard and express shipping, we also offer local pickup by appointment.

    Are you looking for shipping costs to your destination country? You can find this information above directly on eBay.

    You can choose between several options for our shipping.

Click on the image below and then click on "See details".
You have the following payment options in our eBay shop:


We politely ask you to make an appointment before collection.

A notice: Payment methods may differ on eBay marketplaces outside Germany.
We, the company partworks from Paderborn, are specialized in young and vintage cars, especially the Porsche brand. Our focus is on special parts that are not available through regular specialist retailers or vehicle manufacturers. Our products are developed in-house as well as by friendly, global companies that have the same goal as us: to make available what no longer exists.

partworks: the part works - your legend runs.

Top online shop according to Excellent.org
DIN-ISO 9001 certified quality management
Recognized training company

If you are missing something in our program, just talk to us and we may already have a solution.

Be a part of our community!

SAVE Visit our eBay shop to find out about new products and discount promotions.
✅ Cheap ✅ Quality ✉ Shipping until 14h ☎ Telephone service ⭐ Order now ➡ 4x axle boot for PORSCHE 911 2.0 F 912 SET REARThe original from the market leader GKN (Spidan/Löbro)Description:These axle boots are suitable for all Porsche 911 FL and S models with 130, 150 or 160 HP. The set is also suitable for all 912 Coupé or for 914-4 2.0 models. The axle boot set is true to the original and is suitable for the Porsche models mentioned up to, whereby you can find more precise restrictions for the individual models under the heading "Suitable for ". The set of drive collars, fastening material and grease comes from the well-known manufacturer GKN.In addition to these axle boots, we have a variety of other bellows for air-cooled Porsches in our range. You will also find complete drive shafts and