- Condition: 100% new
- Color: As picture shows
- Material: Plastic
- Size: approx. 6.1 x 4.4 x 1.2cm(2.4 x 4.4 x1.2inch) (LxWxH)
- Model: GCJ-01
- Type: Digital Tachometer
- Measuring Range: 100-20000
- Measurement Accuracy: 1%
- Item included:
1 x Digital Tachometer
1 x Cable
- Compatible With: fit for all Fuel or gasoline engines, chainsaws, lawn mowers, gliders, motorcycles, automobiles, karts, engineering vehicles, snowmobiles, ATVs, motor boats, grinders, generators, Vibration machine mechanical equipment and so on
-
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Product Dimension:
Feature:
1) LCD display, low voltage design, inductive design, safe and reliable.
2) A variety of measurement methods: After one end of the electronic wire is installed on the electronic watch casing, use a metal clip to clamp it on the spark plug wire sheath for inductive measurement; the electronic wire is bundled on the spark plug wire sheath and wound for a few times to sense and measure; handheld The tachometer measures 3 cm to 5 cm near the sheath of the spark plug wire.
3) Timing range, 1 minute to 99999 (min MIN).
4) Stable characteristics, high reliability.
Usage Method:
1) Speed mode setting: long press (SET) key, the screen will display 01, 02, 03, 04 in sequence; (screen 01, 02, 03, display the speed mode corresponding to various engine strokes) The factory default value is 02 Speed mode. Releasing the button with your finger will flash the displayed data for 3 to 5 seconds and then confirm the start of the speed mode, and then you can measure.
2) Shut down: Hold down the (SET) key, the screen will display 01, 02, 03, 04 in sequence; when the screen displays 04, it will flash for 3 to 5 seconds. After stopping, confirm to start the system reset mode, and press the (MODE) key at the same time Press and (SET) until the full screen is displayed (the recorded working time and speed data are cleared).
3) Long press (MODE) key to view historical high speed data.
