New for 2023, a set of front and rear lights from Brompton to help you been seen on the road. These lights are rechargeable
Important note (as it says on the back of the box / packaging):
- Fitting instructions included
- These lights are for visibility only
- Check local lighting laws before riding
- Make sure to charge regularly
Brompton Be Seen lights specifications:
- Output:
- Front - 26 lumens
- Rear - 11 lumens.
- Modes: High, Low, Flash, Pulse and Strobe
- Run Time: High: 2 hours, Low: 5 hours, Flash: 10 hours (200ms/300ms), Pulse: 25 hours, Strobe:10 hours
- Charge_Time: 1.5 hours to full
- Weight: TBC
- Water / IP Rating: IP65 (dust and water jet tight)
- Charging by Micro USB, 5V 1A. Charging cable not included
What is in the box?
- A 26 lumen front light (white)
- An 11 Lumen rear light (red)
- Fixings
- Instructions on how to fit and use
Fitting instructions:
Front light:
- The front light fits to the Brompton Integrated brake lever
- First align the mounting block with the groove on brake lever, place the handlebar mount on the handlebar mounting block making sure the holes aligned insert the two M3 socket head screws and tighten
- To fix the light, place the light on the mount, with the power button lining up with the symbol on the mount, then turn the light clockwise until it locks in place
Tools required: 2.5mm Allen key / hex wrench
Rear light:
- The rear light fits underneath the Brompton saddle (only the Brompton saddle!)
- First install the mount into the saddle and insert the M5 button head screw and tighten
- To fix the light, place the light on the mount, with the power button signing up with the symbol on the mount, then turn the light clockwise until it locks in place
Tools required: 3mm Allen key / hex wrench
Operating instructions:
- To turn on, press and hold the on/off switch
- The switch between modes press the on/off switch
Charging:
- Lift the charge port cover and insert a USB charger
- When charging the light to the left of the on/off button will light up red
- When charged the light to the right of the power button will light up green
Brompton Q part code: Q103033
Note - Compatible with all Brompton folding bikes fitted with post 2013 brake levers and fitted with a Brompton saddle with the mounting point under the saddle