PRODUCT CATEGORY | Industrial USB TO TTL serial cable |
---|---|
CHIP SCHEME | FTDI original FT232RNL |
HOST PORT | USB |
DATA RATE | 300bps ~ 3Mbps |
DEVICE PORT | UART |
USB PORT | Connector: USB-A |
Protection: self-recovery fuse, ESD protection | |
UART PORT | Connector: separated 6pin female header |
Protection: IO protection diode | |
INDICATOR | PWR: power indicator, turns on when there is USB connection and voltage is detected |
TXD: TX indicator, turns on while the USB port is sending data | |
RXD: RX indicator, turns on while the device port is sending data back | |
CABLE | Black, PVC sheath, total length 1m |
Adopts Original FT232RNL Chips, Providing Better Stability And Compatibility
Compatible With Popular Systems Like Win7/8/8.1/10/11, Mac, Linux, Android...
Easily Checking The Operating Status, Convenient For Programming / Debugging
VCC | 3.3V or 5V output, configured by switch |
---|---|
GND | Ground |
TXD | Connecting to MCU.RXD (signal direction: MCU.RX < < FT232 < < PC.TX) |
RXD | Connecting to MCU.TXD (signal direction: MCU.TX > > FT232 > > PC.RX) |
RTS | Connecting to MCU.CTS (signal direction: MCU.CTS < < FT232 < < PC.RST) |
CTS | Connecting to MCU.RTS (signal direction: MCU.RTS > > FT232 > > PC.CTS) |
* The above dimensions are measured manually and may have some errors
PARTNUMBER | USB TO TTL | USB TO TTL (B) | USB TO TTL (C) | USB TO TTL (D) |
---|---|---|---|---|
PRODUCT CATEGORY | Industrial USB TO TTL converter | Industrial USB TO TTL serial cable | ||
CHIP | FT232 | CH343G | FT232 | |
DATA RATE | 300bps ~ 3Mbps | 50bps ~ 6Mbps | 300bps ~ 3Mbps | |
HARDWARE FLOW | Supported | Not supported | ||
OS SUPPORT | Win7/8/8.1/10/11, Mac, Linux, Android | |||
USB PORT | Connector: USB-A Protection: resettable fuse, ESD protection | |||
UART PORT | Connector: 8PIN fool-proof header Protection: IO protection diode | Connector: separated 6pin female header Protection: IO protection diode | Connector: separated 4pin female header + SH1.0 3PIN fool-proof connector Protection: IO protection diode | |
INDICATORS | PWR: power indicator, turns on when there is USB connection and voltage is detected TXD: TX indicator, turns on while the USB port is sending data RXD: RX indicator, turns on while the device port is sending data back |
Weight: 0.034 kg
USB TO TTL (C) x1