Platinum Clear PBC-41 is a high gloss 2K Urethane Clearcoat made for the Automotive or Light Industrial market. Water white clear eliminates concerns of color change over silver or white basecoat. Good choice for production work.
Suggested Uses: An economy clearcoat for automotive, parts painting or truck painting over Platinum Basecoat
High gloss is desired
Flexibility is required
UV protection is important
Components:
PBC-41 (Clear Coat)Mixing Ratio: 4:1 Mix four (4) parts PBC-41 Clearcoat to one (1) part selected hardener
Pot Life: 2 hours at 68°F (20°C)
Application: Apply: Two to three medium wet coats/ Allow 7-10 minutes flash between coats
Spray Gun: HVLP Gravity Feed: 1.3 - 1.5mm tip and needle
Conventional: 1.3 - 1.5mm tip and needleDry Times:
Dust Free: 30 minutes at 68°F (20°C)
Tack Free: 15 - 20 minutes at 68°F (20°C)
Sand & Polish: 12 - 24 hours at 68°F (20°C)
Force Dry: 15 minute flash: 40 minutes at 140°F (60°C)
Sand & Polish: After 2 hour cool down
VOC: Regulatory VOC: 483 g/l (4.03 lbs/gl)
Actual VOC: 591.1 g/l (4.9 lbs/gl)
Solids: By Volume: 26.9%
By Weight: 32.5%Coverage: 388.49 square feet per gallon at 100% transfer efficiency, at 50 microns (2 mils) 36.06 square meters per gallon at 100% efficiency, at 50 microns (2 mils)
Repainting: After 24 hours at 68°F (20°C). Sand is recommended for best adhesion. After force dry recommendations are complete, allow cool down for 1 hour prior to sand and recoat.
Storage Stability: One year for A (clear) component, 6 months B (Hardener) component in closed package, in a cool and dry place, away from any heat source.