MTX CD622C Ceiling Speaker Dual Channel, 6 1/2 Inch Woofers, 20 mm Soft Dome Pivoting Tweeters

With a frequency response of 46 Hz - 20 KHz, this speaker reproduces a full sound range from deep bass tones to ultra-high frequencies.
With its space-saving design of only 3-1/8" mounting depth, this speaker offers you maximum flexibility of being able to install it anywhere.
It has the ability direct the high frequencies toward your listening position by incorporating dual tweeters with a Neodymium Motor. For optimal performance the loudspeakers should be placed an equal distance from your listening position and separated so that the angle between them, at the listening position, is between 40 and 60 degrees.
The Contractor Series will mount to ceilings rocked up to 1" thick with the mounting wings in the normal position supplied from the factory. For installations where the ceiling is up to 1-1/2" thick (i.e., soundproof ceilings), simply reverse the direction of the mounting wings to accommodate the thicker material. This speaker can be installed in other materials all the way down to 1/8" thick.

MTX Audio CD622C Specs

System
Speaker Design
In-Ceiling
Power Rating
Peak: 120W
RMS: 60W
Impedance
8 ohm
Frequency Response
46 Hz - 20 KHz
Sensitivity
83.7 dB @ 2.83V/1M
Crossover
6 dB/octave Low-pass
12 dB/octave High-pass
Enclosure
Not Specified by Manufacturer
Shielded
No
Drivers
Tweeter
Dual 1.0" (25.4mm) Silk Dome
Midrange
N/A
Woofer
6.5" (165.1mm) Polypropylene Cone
General
Connector Type
Binding Post (up to 8 gauge wire)
Configuration
2-Way, Dual-Channel
Construction
Not Specified by Manufacturer
Cut-Out Size
7.68" (195.2mm) Diameter
Mounting Depth
3.12" (79.3mm)
Weight
Not Specified by Manufacturer
Color
Matte White/Paintable

Key Features
  • Dual Voice-Coil Tweeters
  • Flush-Mount Design
  • Polypropylene Cone Woofer
  • High-Efficient 120W Driver
  • Versatile Placement
  • Durable Construction
  • Paintable