Specification:
Certification: CE
Origin: Mainland China
Type: Sync Motherboard Cable
Model Number: Flexible Strip Light
Package: Yes
Brand: COOLMOON AOSOR
Model: AL300
Material: Silicone
Lamp beads: 44pcs
Voltage: 5V DC
Current: ≤0.7A±10%
Power: ≤3.5W±10%
Interface: 5V 3PIN*2+4PIN (5V 3-pin female plug into the motherboard 5V ARGB Aura Sync interface, 5V 3-pin male connect with other 5 V ARGB products in series to light up the light; insulation protection cap - pin interface is not used, Cover the cap to prevent short circuit; small 4PIN interface - dedicated interface for COOLMOON brand controller (when the motherboard does not support 5V ARGB, you can purchase the Coolmoon controller to use with it)
Wire length: 600+10%mm
Light board: 300x41x12mm/11.81x1.61x0.47in
Total weight: 0.23kg (including packaging)

Installation method:
(1): Tie fixing
The AL300 flexible light board can be installed on the graphics card and the power supply line of the motherboard by fixing it with a tie.
Installation method: A. Insert the cable tie from a hole on the back of the transparent buckle, B. Pass the cable tie through another hole, fasten the cable tie to the graphics card and the power supply cable of the motherboard, then tighten the cable tie and cut it off Just the excess
(2): Double-sided tape fixed
By fixing with double-sided tape, the AL300 flexible light board can be pasted on the free plane of the chassis for use.
Installation method: A. Paste the double-sided tape on the transparent buckle, B. Tear off the protective film on the surface of the double-sided tape, and then paste and fix the AL300 soft light board to a suitable position on the chassis.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
6pcs Specification:
6pcs Certification: CE
6pcs Origin: Mainland China
6pcs Type: Sync Motherboard Cable
6pcs Model Number: Flexible Strip Light
6pcs Package: Yes
6pcs Brand: COOLMOON AOSOR
6pcs Model: AL300
6pcs Material: Silicone
6pcs Lamp beads: 44pcs
6pcs Voltage: 5V DC
6pcs Current: ≤0.7A±10%
6pcs Power: ≤3.5W±10%
6pcs Interface: 5V 3PIN*2+4PIN (5V 3-pin female plug into the motherboard 5V ARGB Aura Sync interface, 5V 3-pin male connect with other 5 V ARGB products in series to light up the light; insulation protection cap - pin interface is not used, Cover the cap to prevent short circuit; small 4PIN interface - dedicated interface for COOLMOON brand controller (when the motherboard does not support 5V ARGB, you can purchase the Coolmoon controller to use with it)
6pcs Wire length: 600+10%mm
6pcs Light board: 300x41x12mm/11.81x1.61x0.47in
6pcs Total weight: 0.23kg (including packaging)
6pcs Installation method:
6pcs (1): Tie fixing
6pcs The AL300 flexible light board can be installed on the graphics card and the power supply line of the motherboard by fixing it with a tie.
6pcs Installation method: A. Insert the cable tie from a hole on the back of the transparent buckle, B. Pass the cable tie through another hole, fasten the cable tie to the graphics card and the power supply cable of the motherboard, then tighten the cable tie and cut it off Just the excess
6pcs (2): Double-sided tape fixed
6pcs By fixing with double-sided tape, the AL300 flexible light board can be pasted on the free plane of the chassis for use.
6pcs Installation method: A. Paste the double-sided tape on the transparent buckle, B. Tear off the protective film on the surface of the double-sided tape, and then paste and fix the AL300 soft light board to a suitable position on the chassis.
6pcs Note:
6pcs Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
6pcs Please allow 1-2cm measuring deviation due to manual measurement.