Product selling points and features:

1. The output voltage is 110~2600V DC, you can turn the voltage adjusting button clockwise to make the voltage bigger, and counterclockwise to make the voltage smaller.

2. The output current is 0.25~3.4mAh, you can turn the voltage adjustment button clockwise to make the current bigger, and counterclockwise to make the current smaller.

3. When testing MOS tubes, transistors and Zener diodes, it is recommended to adjust the current to the minimum size of 0.25mA. When testing LED backlight boards, it is recommended to adjust the current to a maximum size of 3.4mAh.

4.Portable size: the small size of this tool is very convenient for daily use, you can carry it in your tool bag without taking up too much storage space.

5.Built-in 600 mAh high-capacity lithium battery power supply, which can be charged in time through the Type-C port.

6.Wide range of applications: the tool can be widely used for MOS, triode, IGBT, diode, Zener diode, diode bridge maximum voltage capacity test, capacitor and varistor voltage verification, LED backlighting and light board test, etc.

Product Parameters:

Battery capacity: 3.7V 600mAH

Charging port: TYPE-C

Input: 5V 1A

Charging current: Max.550mA

Output voltage: 120-2700V

Output Current: 0.2-3.8mA

Applicable components: MOS tube/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/one-way thyristor/rectifier bridge

Test Objective: Breakdown voltage value of electronic components

Attention:

1. Don't use it to test high voltage large electrolytic capacitors such as 450V/220UF. It is OK to test low voltage capacitors such as 2200UF/35V.

2. If there is no output voltage when pressing the red high-voltage start button, it is likely that the voltage of the lithium battery is lower than 3.1V, which can't energise the tester, and it needs to be charged in time.

3. Only when testing LEDs and voltage regulator diodes, the output current can be adjusted to the maximum value, for testing other parts, the output current can be adjusted to the minimum value to avoid damaging the parts.

Package and list:

Carton package

Standard: host * 1 + manual * 1 + pen * 1

High: host *1 + manual *1 + pen *1 + LCR test clip *1