Seagull S6+ Cedar
Description
Seagull's S series S6+CEDAR.
The top of the body is made of cedar veneer, and the back and sides are made of wild cherry.
The body size is dread size.
After we receive the item, we will clean it, make overall adjustments (string replacement, rod adjustment, string height adjustment), nut saddle adjustment, and replace defective screws.
The neck has some wavy symptoms and has been adjusted by rubbing the frets together, so the playing condition is good.
The hard case is sticky due to hydrolysis.
The parts are dull and there are dents in several places on the top, but it is in good condition with relatively little signs of use.
Year of manufacture
Made in 1999
truss rod
There is plenty of room
fret
60 70
accessories
Hard case genuine
Country of origin
CANADA
weight
2.09kg
serial
99193511
Truss rod | Caution: The rod has been checked up to 60 degrees left and right and there are no problems. There is some waving.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.5mm above the 12th fret
String height (treble string side) | 2.0mm above 12th fret
Nut width | 46.0mm
Neck thickness around 1st fret |19.0mm
Neck thickness around 12th fret |-
Scale|630mm(24.8")
RADIUS|356mm(14")
Strings during setup | GalliStrings .012-.054set
Repair Maintenance points | Cleaning String replacement Rod adjustment String height adjustment Grinding Nut adjustment
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year 1999
Serial number 99193511
Accessories hard case,
The top of the body is made of cedar veneer, and the back and sides are made of wild cherry.
The body size is dread size.
After we receive the item, we will clean it, make overall adjustments (string replacement, rod adjustment, string height adjustment), nut saddle adjustment, and replace defective screws.
The neck has some wavy symptoms and has been adjusted by rubbing the frets together, so the playing condition is good.
The hard case is sticky due to hydrolysis.
The parts are dull and there are dents in several places on the top, but it is in good condition with relatively little signs of use.
Year of manufacture
Made in 1999
truss rod
There is plenty of room
fret
60 70
accessories
Hard case genuine
Country of origin
CANADA
weight
2.09kg
serial
99193511
Truss rod | Caution: The rod has been checked up to 60 degrees left and right and there are no problems. There is some waving.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.5mm above the 12th fret
String height (treble string side) | 2.0mm above 12th fret
Nut width | 46.0mm
Neck thickness around 1st fret |19.0mm
Neck thickness around 12th fret |-
Scale|630mm(24.8")
RADIUS|356mm(14")
Strings during setup | GalliStrings .012-.054set
Repair Maintenance points | Cleaning String replacement Rod adjustment String height adjustment Grinding Nut adjustment
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year 1999
Serial number 99193511
Accessories hard case,