LEKATO Wireless Microphone System Transmitter Receiver 5.8GHz XLR Plug On 100FT

Product Features:

• 🎤No Interference Wireless System
  Transmitter and receiver system utilize the 5.8GHz ISM frequency band, free from interference
  Designed for any dynamic/harmonic mic, no need the cable
  Up to 100ft of wireless range. (Not work with condenser mic)
  
  
• 🎤High Quality Sound Transmission
  24bit Audio Resolution with Sampling Frequency of 48K provides stable and reliable wireless transmission. 
  Less than 6ms latency, no lag or no signal loss.
  Ensures good performance for your every time
  
  
• 🎤Built-in Rechargeable Battery & Power Indicator
  Transmitter and receiver can charge simultaneously with the dual port USB cable. More than 5 hours playing time. 
  You can know the battery level when turn on the unit and the related channel's indicators.
  
  
• 🎤1-Key and Multi-Channel
  Long press the signal key to match transmitter and receiver at the same time.
  4 switchable channels, a maximum of 4 sets receivers can be matched with the same transmitter simultaneously.
  
  
• 🎤Dynamic- XLR Transmitter and XLR Receiver
  Works with any dynamic/Harmonic microphone or battery-powered condenser wireless microphones system, Audio mixer, PA system, Provides stable and reliable wireless transmission.

Product Specifications: 

🎤MW-01 receiver

• Power Supply Mode: built-in lithium battery
• Cell Capacity:3.7V 400mAh
• Reception Sensitivity:- 85dBm
• Received Frequency:5 8GHz frequency
• Anti-jamming Method: Frequency hopping
• Signal Distortion:<0.02%
• Gain:0 dB
• SNR:105dB
• Frequency Response: 20Hz - 20KHz
• Delay Time:<5ms
• Sampling Rate:24-bit /48KHz
• Output Impedance:6800
• Port's Type: XLR male port

 

🎤Transmitter and Receiver Pairing

The default setting for MW-1 microphone wireless system is Channel 1, if you want to use other channels, please proceed according to the following steps: .

1.Turn on the receiver and the transmitter.

2.Connect the receiver to the microphone and the transmitter to the mixer or other equipment.

3.You can long press the channel switch button to pair up the channels of the receiver and the transmitter, the signal is to be paired up when the status indicator flickers blue.

4.When they' re paired successfully, the status indicators on both of the transmitter and the receiver become blue.

 

🎤Battery charging

• You can see the receiver and transmitter's battery level when you turn on the unit and the related channel's indicators.
• When the status indicator starts to flicker in red, it indicates low battery, and it's time to charge the unit.
• When the unit is being charged, the status indicator is in red.It goes off when it's fully charged.
• Attention: You can charge the transmitter and receiver simultaneously with the Dual Port USB Cable.

NOTE:Only suitable for dynamic microphones

 

Package Included:

• 🎤1 x LEKATO Wireless Microphone System MW-1 Receiver
• 🎤1 x LEKATO Wireless Microphone System MW-1 Transmitter
• 🎤1 x Rechargeable Power Cable