This CNC kit included:
- 1 x DM542T: Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
- 1 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC
- 1 x LRS-150-36: MEANWELL 154.8W 36VDC 4.3A 115/230VAC Enclosed Switching Power Supply
Motor Specification
- Manufacturer Part Number: 23HS45-4204S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8deg
- Holding Torque: 3.0Nm(425oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Inductance: 3.8mH±20%(1KHz)
- Frame Size: 57 x 57mm
- Body Length: 113mm
- Shaft Diameter: Φ10mm
- Shaft Length: 24mm
- D-cut Length: 20mm
- Number of Leads: 4
- Lead Length: 400mm
Driver Specification
- Pulse Width: 2.5μS
- Isolation Resistance: 500MΩ
- Pulse Input Frequency: 0~200kHz
- Output Peak Current: 1.0~4.5A(3.2RMS)
- Input Voltage: +18~50VDC(Typical 36VDC)
- Logic Signal Current: 7~16mA(Typical 10mA)
- Support PUL/DIR mode
- Automatic idle-current reduction
- Over-voltage and over-current protections
- Soft-start with no “jump” when powered on
- 5V/24V logic voltage selector, default setting 24V
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
- Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver
- 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.50A
- Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 16 selectable microstep resolutions including 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
Power Specification
- 36V DC 4.3A output
- AC input voltage range: 85 ~ 132VAC
- Rated power: 154.8W
- AC input range selectable by switch
- Withstand 300VAC surge input for 5 second
- No load power consumption < 0.5W
- Protections: Short circuit / Overload / Over voltage / Over temperature
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
On Mar 26, 2024 at 00:20:09 PDT, seller added the following information: