The GB75 is equipped with a single pickup, humbucker pickup, and active circuit to support a wide range of sounds.
The specifications are reminiscent of the 70's, such as the ash body and maple fingerboard block position marks.

*After receiving the item from our company, we have cleaned it, made overall adjustments (string replacement, rod adjustment, octave adjustment, string height adjustment), electrical repairs (battery snap replacement, POT cleaning), and alignment, so it is in good playing condition.
The tension bar has been replaced.
There is a dent on the tip of the head, and there are other signs of use such as small scratches and small dents.

Product rank: B+ (good product)
Year of manufacture: Made in 2012
Truss rod: plenty of room
Fret: 60-70%
Accessories: Soft case/non-genuine
Country of origin: INDONESIA
Weight: 4.20kg
Serial: 1206002690

*The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.

Product Specifications
Truss rod: [No problem] The rod has been checked up to 60 degrees left and right and there is no problem.
Remaining frets: [No problem] Sufficient fret height
String height (bass string side): 2.5mm above the 12th fret
String height (treble string side): 2.0mm above the 12th fret
Nut width: 45.5mm
Neck thickness (near the 1st fret): 21.1mm
Neck thickness (near the 12th fret): 23.6mm
Scale: 864mm (34")
RADIUS:432mm (17")
Strings at setup: D'Addario / .045-.135 set
Repair/maintenance points: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, electrical repair