New DC12V Brushless Water Pump/Oil Pump DC50K-12120S
12.0m Max Height & 1260L/H Max Flow & 54W
Key Advantages
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/005502/Image/DC50K_12120S.jpg)
• Brushless design and permanent magnetic rotor enable long life time with maintenance-free.
• The axis emploies static sealing instead of dynamic sealing to avoid leaking problems.
• Stator and circuit board sealed by epoxy resin. High performance ceramic shaft adopted.
• Amphibious design. Capable of submersible installation and entirely waterproof.
• Compact size with high efficiency, low consumption and low noise.
Maximum liquid temperature: 100°C, 212F
DC50K SERIES
(Available Models)
Model |
Voltage(V) |
Max Current(A) |
Max Head(m)
at zero flow |
Max Flow(L/H)
at zero head |
Max Power(w) |
DC50K-1260T |
12 |
2.0 |
6.0 |
900 |
24W |
DC50K-1260S |
12 |
2.0 |
6.0 |
900 |
24W |
DC50K-1260A |
12 |
2.0 |
6.0 |
900 |
24W |
DC50K-12120S |
12 |
4.5 |
12.0 |
1260 |
54W |
DC50K-12120A |
12 |
4.5 |
12.0 |
1260 |
54W |
DC50K-2490T |
24 |
2.0 |
9.0 |
1080 |
48W |
DC50K-2490S |
24 |
2.0 |
9.0 |
1080 |
48W |
DC50K-2490A |
24 |
2.0 |
9.0 |
1080 |
48W |
DC50K-24160S |
24 |
3.6 |
16.0 |
1380 |
86.4W |
DC50K-24160A |
24 |
3.6 |
16.0 |
1380 |
86.4W |
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/005502/Image/DC50K_12120_curve.jpg) |
Frequently Asked Questions
• Does the Head mean I can use the pump to pump water up to the height directly?
No, the pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump (refer to the above Head-Flow Curve graph). the Head ead means when you connect a little hose on the output of pump, the max height of the pump can pump. If you do not connect a little hose on it, it can not pump water to the height in AD.
• Can I connect it to my solar panel?
Yes, you can. Please make sure the output voltage of your solar panel is stable and less than DC12V, otherwise it will damage the pump.
• Can I dry run the pump (run but not pumping water)?
No. Dry run will damage the pump and shorten its working life time.
Note
• The black box contains circuit board rather than transformer, for which input voltage should be less than DC12V. The external circuit board is designed for sustaining water temperature up to 100°C.
• This pump is centrifugal pump and cannot expel air automatically. For operation within liquid, it must be submersible installation. For outside liquid installation, make sure it is below the liquid surface.
• Please stop running if the pump is blocked and prevent any hard particles from entering the pump.