This HDMI to SDI Converter allows HDMI signals to be shown on SDI display at high bit rates of 2.970 Gbit/s without any loss. It max supports 1080P 60Hz resolution, and 3G-SDI distance up to 100m (328ft).
Note:
- It is single direction converter, from HDMI to SDI, NOT supports SDI to HDMI
- It is NOT upscaler, it cannot upgrade video resolution
- Not support 4K
Packing List (bulk pack):
- 1 x HDMI to SDI Converter
- 1 x Power Adapter
Features:
- Shows HDMI source on SDI display
- Supports SDI output distance up to 100 meters (3G-SDI), 200 meters (HD-SDI), or 300 meters (SD-SDI)
- SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s, 1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
- Supports HDMI input timings: 480i@59.94, 576i, 720p@50/59.94/60, 1080i@50/59.94/60, 1080p@23.98/24/25/29.97/30/50/59.94/60
- Converts HDMI signal to SDI:
- 480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
- 720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or 1.485/1.001 Gbit/s)
- 1080p to 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s)
- Works as transmitter side of HDMI extender over BNC coaxial cable (need to work with SDI to HDMI converter, sold seperately)
Specifications:
- Input Port: 1 x HDMI
- Output Port: 1 x BNC (SDI/ HD-SDI/ 3G-SDI)
- SDI Transmission Rate: 2.970 Gbit/s and 2.970/1.001 Gbit/s
- Power Supply: DC 5V -12V
- ESD Protection Human body model: ±8kV (air-gap discharge), ±4kV (contact discharge)
- Power Consumption (Max): 5W
- Size: 94 x 49 x 25mm (3.7 x 1.9 x 1 inch)
- Weight: 117g (4.13 oz)