A model that faithfully reproduces Brian May's main guitar "Red Special" under his supervision! !
In addition to the mahogany body, mahogany neck, and ebony fingerboard, it has a chamber structure with a portion of the interior of the body being hollow.
The controls are 1 volume, 1 tone, and each pickup has an on/off switch and a phase slide switch.

There are scratches and abrasions on the entire body, dents on the body and back, scratches and slight dullness on the metal parts, cracked paint repair adhesive marks on the side of the neck, and paint defects on the back of the neck.
There are no noticeable abnormalities in the neck and the playing condition is fine.

*The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.

Product Specifications
Product rank: B: There are some scratches and signs of use, but there are no problems in normal use.
Serial number: BHM3259
Year of manufacture:-
Country of manufacture:-
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.66kg
Truss rod: [No problem] The rod has been checked up to 60 degrees left and right and there is no problem.
Remaining frets: [No problem] Sufficient fret height
String height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 43.6mm
Neck thickness (near the 1st fret): 20.7mm
Neck thickness (near the 12th fret): 23.0mm
Scale: 628mm (24.75")
RADIUS:184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
changes:-
Repair/maintenance points: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment
others:-