Gretsch 6129-TL Pearl Jet Peraloid Top Brown Back
Description
6129-TL is equipped with GRETSCH's original Filtertron pickup on a single-cut body, and the pearloid on the top of the body creates an exquisitely gorgeous look.
The chambered mahogany body and humbucker yet low-power, clear Filtertron pickup produce an airy sound that cannot be achieved with solid-body guitars.
This model is full of originality in terms of design and functionality, such as the control knob engraved with "G", the master volume, each pickup volume, and the master tone.
There are many buckle scratches on the body back, dents are scattered around the outer periphery, and the metal parts are dull.
Although there are signs of use, each part has been maintained and cleaned at our repair center and is in good playability.
A non-genuine hard case is included, but the exterior is torn and has tape and stickers attached.
Truss rod Tighten/Loosen there is some leeway.
Frets around 60% 70%
String height (bass string side) 2.0mm above the 12th fret
String height (treble string side) 1.5mm above the 12th fret
Nut width 42.5mm
Neck thickness around 1st fret
20.2mm
Neck thickness around 12th fret
21.5mm
Scale 628mm(24.75")
RADIUS 305mm(12")
Strings during setup ERNIEBALL2221 .010-.046set
Year of manufacture: 1996
Country of manufacture: Japan
Case hard case non-genuine
Accessories None
Serial number 965129-745
Weight 3.81kg
Repair Maintenance points Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Grinding Electrical repair Nut adjustment
changes -
Manufacture year unknown
Serial number 965129-745
The chambered mahogany body and humbucker yet low-power, clear Filtertron pickup produce an airy sound that cannot be achieved with solid-body guitars.
This model is full of originality in terms of design and functionality, such as the control knob engraved with "G", the master volume, each pickup volume, and the master tone.
There are many buckle scratches on the body back, dents are scattered around the outer periphery, and the metal parts are dull.
Although there are signs of use, each part has been maintained and cleaned at our repair center and is in good playability.
A non-genuine hard case is included, but the exterior is torn and has tape and stickers attached.
Truss rod Tighten/Loosen there is some leeway.
Frets around 60% 70%
String height (bass string side) 2.0mm above the 12th fret
String height (treble string side) 1.5mm above the 12th fret
Nut width 42.5mm
Neck thickness around 1st fret
20.2mm
Neck thickness around 12th fret
21.5mm
Scale 628mm(24.75")
RADIUS 305mm(12")
Strings during setup ERNIEBALL2221 .010-.046set
Year of manufacture: 1996
Country of manufacture: Japan
Case hard case non-genuine
Accessories None
Serial number 965129-745
Weight 3.81kg
Repair Maintenance points Cleaning String replacement Rod adjustment Octave adjustment String height adjustment Grinding Electrical repair Nut adjustment
changes -
Manufacture year unknown
Serial number 965129-745