Petec 3 x 500ml Oil Stain Remover

 

For binding and removing environmentally harmful fuel and oil stains on absorbent and non-absorbent surfaces of all materials such as concrete, asphalt, plaster, tiles and much more.

 

• Binds and removes oil stains

• Easy to use

• Fast and economical

 

Instructions for use

Shake can well before use. Spray PETEC oil stain remover on the oily surface from a distance of approx. 20 cm and leave to work for 20 to 30 minutes. After the drying time, remove residues and repeat the process if necessary.

 

danger sign

Contains: Hydrocarbons, C7, n-alkanes, iso-alkanes, cyclic, acetone; Contains: >= 30%: aliphatic hydrocarbons

 

H222: Extremely flammable aerosol.

H229: Pressurized container: May burst if heated.

H315: Causes skin irritation.

H319: Causes serious eye irritation.

H336 May cause drowsiness and dizziness.

H411 ​​Toxic to aquatic life with long lasting effects.

P102: Keep out of the reach of children.

P211: Do not spray on an open flame or other ignition source.

Avoid the release of P273 into the environment.

P302 + P352 IF ON SKIN: Wash with plenty of soap and water.

P410 + P412: Protect from sunlight and do not expose to temperatures above 50°C/122°F.

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing.

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P251: Do not pierce or burn, even after use.

P362 + P364: Take off contaminated clothing and wash before reuse.

P304 + P312: IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell.

P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

For binding and removing environmentally harmful fuel and oil stains on absorbent and non-absorbent surfaces of all materials such as concrete, asphalt, plaster, tiles and much more. Shake can well before use. Spray PETEC oil stain remover on the oily surface from a distance of approx. 20 cm and leave to work for 20 to 30 minutes. After the drying time, remove residues and repeat the process if necessary. Contains: Hydrocarbons, C7, n-alkanes, iso-alkanes, cyclic, acetone; Contains: >= 30%: aliphatic hydrocarbons P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P501: Dispose of contents/container in accor
For binding and removing environmentally harmful fuel and oil stains on absorbent and non-absorbent surfaces of all materials such as concrete, asphalt, plaster, tiles and much more. Shake can well before use. Spray PETEC oil stain remover on the oily surface from a distance of approx. 20 cm and leave to work for 20 to 30 minutes. After the drying time, remove residues and repeat the process if necessary. Contains: Hydrocarbons, C7, n-alkanes, iso-alkanes, cyclic, acetone; Contains: >= 30%: aliphatic hydrocarbons P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P501: Dispose of contents/container in accor