ARCDROID 35mm Plasma machine torch clamp mounts, fits 35mm/ 1.375" torch diameter.  Front clamp is slotted to clear gear rack on machine torch main tube which allows for a broader range of height adjustment.  It is recommended to have one clamp on the main tube body at all times. Clamping on the lower tube assembly only is a sure way to break your torch.  Clamps are 1/2" thick x 2"wide 2" deep. Standoff from back of base to center of torch is 21mm/ .825".  Mounting bolt pattern is 32mm wide on center to fit into original clamp hole pattern of the Arcdroid quick release bracket.  Made from 6061 billet aluminum in the USA.   Clamp is held in place by 5mm flat head bolts that have a 1/2" bite into back of clamps. The rubber boots on the locking levers will need to be removed to clear upper clamp. A slight outward bend on the lever arms will allow clearance of the upper clamp if you want to leave the boots on.  Clamp mounting hardware included.  Ships in 1-3 days.  NOTE: If you have a different size torch diameter, contact me and  I will make clamps with that diameter