|
|
|
|
|
|
|
|
Product Introduction
Type: A/C Compressor
Voltage: 12V
Warranty: 1 Year
Refrigerant Type: R-134A
Fitment Type: Direct Replacement
Features
*Condition: 100% Brand New and High Quality.
*According to the original factory specifications.
*Perfect match for the original car.
*Stable characteristics, high reliability.
Fits
For 2001-2007 Ford Escape 3.0L
For 2001-2006 Mazda Tribute 3.0L
Package Include
1 x AC Compressor w/Clutch
Symptoms of a failing AC compressor clutch
AC compressor clutch won’t engage. Bad clutch coil or improper air gap
AC clutch screeches. Rust accumulation on clutch plate and pulley or incorrect air gap.
AC blows warm. Clutch is slipping and not providing maximum refrigerant compression.
INSTALLING THE NEW A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet
3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
5. Next, install the new A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.
Note
Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
| Item Specifics | |
|---|---|
| Brand | autobtparts |
| Manufacturer Part Number | 9934100 |
| Manufacturer Warranty | 1 Year |
| Interchange Part Number | CO 101640C |
| Other Part Number | 4L3Z19703AB,EFY46145Z,EFY46145Z,58145,6511454,20-10795-AM |
| Fitment Type | Direct Replacement |
| Custom Bundle | No |
| Compressor type | FS10 |
| Modified Item | No |
| Voltage | 12V |
| Type | A/C Compressor |
| Color | Silver |
| Grooves | 6 |
| Oil Type | Pag 46 |
| Superseded Part Number | 1520381,1520495,1520699,DW57145,57145 |
| Package Include | 1 x AC Compressor |
We maintain high standards of excellence (five stars review) and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
We request that you contact us immediately if you don't satisfied with our item or service, do not leave feedback before we solve your problem, so that we can satisfactorily address your concerns.
Do Check the compatibilities before placing order, or if you have any question in compatible chart, contact us first.
Any question, please feel free to contact us.
If there's any problem with your order, do contact us please.
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
A/C AC Compressor With Clutch Fit For 2001-2007 Ford Escape Mazda Tribute 3.0L
Product Introduction Refrigerant Type: R-134A
Features
Fits For 2001-2007 Ford Escape 3.0L
Package Include
Symptoms of a failing AC compressor clutch AC clutch screeches. Rust accumulation on clutch plate and pulley or incorrect air gap. AC blows warm. Clutch is slipping and not providing maximum refrigerant compression. 1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed. Flush evaporators from inlet to outlet. 3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube. 5. Next, install the new A/C Compressor. 6. Install and tighten the A/C Compressor mounting bolts. 7. Reconnect any electrical connectors to the A/C Compressor. 8. Re-install the refrigerant lines and A/C belt to the A/C Compressor. 9. Reconnect the negative battery cable. 10. Evacuate the A/C system with an A/C servicing machine for at least one hour. 11. Check the system for leaks. 12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. 13. Start the vehicle’s engine and turn on the A/C system.
Note
Payment
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! Shipping
1. Orders processed within 48 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. If you have not received your shipment within 10 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns & Refunds
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer if the reason is "order by mistake" or "don't want it".
Feedback
We maintain high standards of excellence (five stars review) and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately if you don't satisfied with our item or service, do not leave feedback before we solve your problem, so that we can satisfactorily address your concerns. Contact Us
Do Check the compatibilities before placing order, or if you have any question in compatible chart, contact us first. Any question, please feel free to contact us. If there's any problem with your order, do contact us please. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
