Greco JB450S made in 1976, a Japan vintage product.
Agatis body, maple neck, and rose fingerboard with binding.
The relatively black fingerboard has block inlays.
It has a good graininess and goes well with slap.
As it is a product made over 45 years ago, there is some damage, but this gives it a vintage feel.

The tone pod knob is floating because it is the wrong size.
There are screw holes for the pickup fence and bridge cover, but both are not included.
There is a lot of paint peeling off at the bottom of the body back.
There are scratches, dents, and dullness on the metal parts, and it shows signs of use.
There is no abnormality in the neck and the condition is good.

*The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center. Due to humidity, temperature, etc. during the in-store display period or during product transportation, the actual values may not be the same as those listed when delivered.

Product Specifications
Product rank: B: There are some scratches and signs of use, but there are no problems in normal use.
Serial number: H764446
Year of manufacture: 1976
Country of manufacture: Japan
Case: Non-genuine soft case
accessories:-
Weight: 4.32kg
Truss rod: [No problem] The rod has been checked up to 60 degrees left and right and there is no problem.
Remaining frets: [No problem] Sufficient fret height
String height (bass string side): 2.5mm above the 12th fret
String height (treble string side): 2.0mm above the 12th fret
Nut width: 40.5mm
Neck thickness (near the 1st fret): 21.7mm
Neck thickness (around 12th fret): 24.5mm
Scale: 850mm (33.5")
RADIUS:1F:241mm (9.5") 12F:356mm(14)
Strings at setup: D'Addario EXL165 / .045-.105 set
changes:-
Repair/maintenance points: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
others:-