This model is 4.0TB Western Digital Red (CMR) disk drive. It is used (light home use), but is in very good condition.
Designed for NAS / PC Desktop usage. Primarily designed for usage in NAS Raid / ZFS multi-drive arrays.
The drive has been recently checked with Spinrite 6.1, at Level 5, and passed this ~48 hour deep scan with no sector errors (see below).
The drives recent SMART data logs are also available (see below). The device log shows no recent warnings or errors, with a passing SMART health overall. A recently conducted extended offline test (~10 hours) was passed without error.
The device will be shipped in an industry standard anti-static clamshell container surrounded by 25mm/1 inch thick bubble wrap.
| Drive Specification |
|---|
| Model number | WD40EFRX |
| Interface | SATA 6 Gb/s |
| Formatted capacity | 4TB |
| Form factor | 3.5-inch |
| Advanced Format (AF) | Yes |
| RoHS compliant | Yes |
| Data transfer rate (max) |
| Interface speed | 6 Gb/s |
| Internal transfer rate | 150 MB/s |
| Cache (MB) | 64 |
| Rotational speed (RPM) | IntelliPower |
| Load/unload cycles | 300,000 |
| Non-recoverable read errors per bits read | <1 in 1014 |
| MTBF (hours) | 1,000,000 |
| Limited warranty (years) | 3 |
| 12VDC ±10% (A, peak) | 1.75 |
| 5VDC ±10% (A, peak) | – |
| Average power requirements (W) |
| Read/Write | 4.5 |
|---|
| Idle | 3.3 |
| Standby/Sleep | 0.4 |
| Temperature (°C) |
|---|
| Operating | 0 to 70 |
| Non-operating | -40 to 70 |
| Shock (Gs) |
|---|
| Operating (2 ms, read/write) | 30 |
| Operating (2 ms, read) | 65 |
| Non-operating (2 ms) | 250 |
| Acoustics (dBA) |
|---|
| Idle | 25 |
| Seek (average) | 28 |
| Dimensions |
|---|
| Height (in./mm) | 1.028/26.1 |
| Length (in./mm) | 5.787/147 |
| Width (in./mm, ± .01 in.) | 4/101.6 |
| Weight (lb./kg, ± 10%) | 1.50/0.68 |
############################################################################
# SpinRite Detailed Technical Log generated at 8:19 am on Mar 30th, 2024. #
############################################################################
SpinRite v6.1 - Release 2
Type|Port|BIOS|Runtime|Size| Model | Serial
----+----+----+-------+----+------------------------------+-------------------
AHCI| 0 | 81 | 66,008|4.0T|WDC WD40EFRX-68WT0N0 |WD-WCC4E0273690
BIOS| 80 | 80 | ... |2.0G|This is the system boot drive |
+==========================================================================+
| SpinRite 6.1, beginning level 5 operation at 8:19 am on Mar 30th, 2024. |
|--------------------------------------------------------------------------|
| From 0.0000% sect: 0 To 100.0000% sect: 7,814,037,167 |
|==========================================================================|
| WDC WD40EFRX-68WT0N0 |
|--------------------------------------------------------------------------|
| access mode: AHCI serial number: WD-WCC4E0273690 |
| pci bus addr: 0:17:0 firmware rev: 80.00A80 |
| adapter vendor: Advanced Micro rotation rate: 5400 |
| vendor-device: 1002-4391 ata/atapi spec: ATA-8 |
| bios drive: 81h drv technology: generic |
| attached port: 0 lba in use: yes, 48-bit LBA |
| port speed: SATA 2 at 3.0Gb/s |
| max driv speed: SATA 3 at 6.0Gb/s multi-word dma: -/2 (unknown md) |
| ultradma modes: 6/6 (133.3 MB/s) |
| sector count: 7,814,037,168 available pio: 4/4 (16.67 MB/s) |
| byte count: 4,000,787,030,016 |
| 4Ksec features: SMART SECURE POWR |
| transfers: 32,768 sector long ops: no : WCACH LOOKAHD HPA |
| AHCI speed: 124,376,484 byte/s feature detail: 746B7D61 7469BC41 |
|==========================================================================|
| Level: 5 Graphic Status Display |
|==========================================================================|
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
| :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: |
|--- work ---- remaining --- completed +------- sector status key ---------|
| megabytes: 0.000 4,000,787 | .oO analyzing | R recovered |
| %: 0.000% 100.000%| . unprocessed | B defective |
| time: 0:00:00 55:12:12 | : processed | U unrecovered |
|==========================================================================|
| Final Sector Event Counts |
|--------------------------------------------------------------------------|
| command timeout: 0 command aborted: 0 |
| comm/cable errs: 0 not recoverable: 0 |
| minor troubles: 0 sect neverfound: 0 |
| dynastat recovr: 0 defective sectr: 0 |
|==========================================================================|
| End-of-Run SMART System Status |
|--------------------------------------------------------------------------|
| monitored param margin current/max raw data |
| ECC corrected 0 :::::::::::::::::::::::::::::: 149/149 000000000000E2 |
| rd chan margin - |
| relocated sect 0 :::::::::::::::::::::::::::::: 60/60 00000000000000 |
| realloc events 0 :::::::::::::::::::::::::::::: 200/200 00000000000000 |
| seek errors 0 :::::::::::::::............... 100/200 00000000000000 |
| recal retries 0 :::::::::::::::::::::::::::::: 100/100 00000000000000 |
| cabling errors 0 :::::::::::::::::::::::::::::: 200/200 0000000000004A |
| uncorrectable 0 :::::::::::::::::::::::::::::: 200/200 00000000000000 |
| write errors 0 :::::::::::::::::::::::::::::: 200/200 00000000000000 |
| command timeout - |
| pending sectors 0 :::::::::::::::::::::::::::::: 200/200 00000000000000 |
| read retries - |
| total writes - |
| write failures - |
| wear leveling - |
| remaining life - |
| realloc space - |
|--------------------------------------------------------------------------|
| drive temperature: 29'C/ 84'F |
|==========================================================================|
| SpinRite 6.1, level 5 operation completed at 3:31 pm on Apr 1st, 2024. |
+==========================================================================+
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.0-9-generic] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (CMR)
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E0273690
LU WWN Device Id: 5 0014ee 2b3c59f63
Firmware Version: 80.00A80
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database 7.3/5608
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Apr 6 17:34:35 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
Total time to complete Offline
data collection: (53280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 532) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 226
3 Spin_Up_Time POS--K 186 157 021 - 7683
4 Start_Stop_Count -O--CK 100 100 000 - 314
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 010 010 000 - 66081
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 254
192 Power-Off_Retract_Count -O--CK 200 200 000 - 211
193 Load_Cycle_Count -O--CK 099 099 000 - 303774
194 Temperature_Celsius -O---K 116 105 000 - 36
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 196 000 - 74
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 13
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 13 [12] occurred at disk power-on lifetime: 43679 hours (1819 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 67 3b ff 00 40 00 Error: UNC at LBA = 0x1673bff00 = 6026952448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 c8 00 01 67 3c 00 00 40 08 9d+13:59:12.226 READ FPDMA QUEUED
60 01 00 00 88 00 01 67 3b ff 00 40 08 9d+13:59:12.225 READ FPDMA QUEUED
60 01 00 00 c0 00 01 67 3b f3 c8 40 08 9d+13:59:12.224 READ FPDMA QUEUED
60 01 00 00 b8 00 01 67 3b f2 c8 40 08 9d+13:59:12.223 READ FPDMA QUEUED
60 01 00 00 b0 00 01 67 3b f1 c8 40 08 9d+13:59:12.222 READ FPDMA QUEUED
Error 12 [11] occurred at disk power-on lifetime: 42184 hours (1757 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 e4 25 f4 e8 40 00 Error: IDNF at LBA = 0xe425f4e8 = 3827692776
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 10 00 00 e4 25 f4 e8 40 08 3d+00:33:45.050 WRITE FPDMA QUEUED
61 00 28 00 a0 00 00 e4 25 f4 a0 40 08 3d+00:33:45.033 WRITE FPDMA QUEUED
61 00 08 00 98 00 00 e4 25 f4 90 40 08 3d+00:33:45.033 WRITE FPDMA QUEUED
61 00 18 00 88 00 00 e4 25 f4 70 40 08 3d+00:33:45.008 WRITE FPDMA QUEUED
61 00 08 00 68 00 00 e4 25 f4 58 40 08 3d+00:33:45.008 WRITE FPDMA QUEUED
Error 11 [10] occurred at disk power-on lifetime: 42183 hours (1757 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 9e 6e 5d 70 40 00 Error: UNC at LBA = 0x9e6e5d70 = 2658033008
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 a8 00 00 9e 6e 5d 70 40 08 2d+23:36:08.753 READ FPDMA QUEUED
60 01 00 00 a0 00 00 9e 6e 5c 70 40 08 2d+23:36:08.753 READ FPDMA QUEUED
60 00 50 00 10 00 01 9c 02 f8 90 40 08 2d+23:36:08.711 READ FPDMA QUEUED
60 01 00 00 08 00 00 9e 63 dd f8 40 08 2d+23:36:08.711 READ FPDMA QUEUED
60 01 00 00 b0 00 00 9e 60 b9 f8 40 08 2d+23:36:08.698 READ FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 42145 hours (1756 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 70 50 54 20 40 00 Error: IDNF at LBA = 0x170505420 = 6179279904
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 c0 00 01 70 50 54 20 40 08 1d+09:37:04.874 WRITE FPDMA QUEUED
61 00 08 00 b8 00 01 70 50 53 60 40 08 1d+09:37:04.874 WRITE FPDMA QUEUED
61 01 00 00 00 00 01 70 49 95 00 40 08 1d+09:37:04.854 WRITE FPDMA QUEUED
61 00 08 00 f0 00 01 70 50 53 08 40 08 1d+09:37:04.854 WRITE FPDMA QUEUED
61 00 20 00 50 00 01 70 49 94 e0 40 08 1d+09:37:04.853 WRITE FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 42138 hours (1755 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 84 e7 cd 00 40 00 Error: UNC at LBA = 0x184e7cd00 = 6524751104
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 38 00 01 84 e7 cd 00 40 08 1d+02:40:34.341 READ FPDMA QUEUED
60 01 00 00 30 00 01 84 e7 cc 00 40 08 1d+02:40:34.341 READ FPDMA QUEUED
60 01 00 00 28 00 01 84 e7 cb 00 40 08 1d+02:40:34.323 READ FPDMA QUEUED
60 01 00 00 20 00 01 84 e7 ca 00 40 08 1d+02:40:34.323 READ FPDMA QUEUED
60 01 00 00 00 00 01 84 e7 c5 00 40 08 1d+02:40:34.317 READ FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 42124 hours (1755 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 60 61 b6 c8 40 00 Error: IDNF at LBA = 0x16061b6c8 = 5911983816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 28 00 68 00 01 60 61 b6 c8 40 08 12:55:27.605 WRITE FPDMA QUEUED
61 00 10 00 b0 00 01 60 61 b7 a8 40 08 12:55:27.605 WRITE FPDMA QUEUED
61 00 10 00 a8 00 01 60 61 b7 20 40 08 12:55:27.605 WRITE FPDMA QUEUED
61 00 08 00 e8 00 01 60 61 b7 18 40 08 12:55:27.599 WRITE FPDMA QUEUED
61 00 08 00 e0 00 01 60 61 b7 10 40 08 12:55:27.599 WRITE FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 40794 hours (1699 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 88 96 74 d8 40 00 Error: IDNF at LBA = 0x889674d8 = 2291561688
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 68 00 00 88 96 74 d8 40 08 11:42:48.813 WRITE FPDMA QUEUED
61 00 40 00 60 00 00 88 96 6e 88 40 08 11:42:48.812 WRITE FPDMA QUEUED
61 00 20 00 58 00 00 88 96 6d 50 40 08 11:42:48.812 WRITE FPDMA QUEUED
61 00 20 00 48 00 00 88 96 6d 30 40 08 11:42:48.812 WRITE FPDMA QUEUED
61 00 08 00 40 00 00 88 96 6d 20 40 08 11:42:48.812 WRITE FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 40789 hours (1699 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 01 66 19 23 78 40 00 Error: UNC at LBA = 0x166192378 = 6007890808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 e0 00 01 66 19 22 78 40 08 06:28:55.293 READ FPDMA QUEUED
60 01 00 00 d8 00 01 66 19 23 78 40 08 06:28:55.293 READ FPDMA QUEUED
27 00 00 00 00 00 00 00 00 00 00 e0 00 06:28:55.288 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 06:28:55.288 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 00 06:28:55.287 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 63190 -
# 2 Conveyance offline Completed without error 00% 41889 -
# 3 Extended offline Completed without error 00% 37042 -
# 4 Extended offline Interrupted (host reset) 80% 23250 -
# 5 Extended offline Completed without error 00% 17726 -
# 6 Extended offline Completed without error 00% 8673 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: DST executing in background (3)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 27/37 Celsius
Lifetime Min/Max Temperature: 3/47 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (349)
Index Estimated Time Temperature Celsius
350 2024-04-06 09:37 37 ******************
... ..( 67 skipped). .. ******************
418 2024-04-06 10:45 37 ******************
419 2024-04-06 10:46 36 *****************
... ..( 30 skipped). .. *****************
450 2024-04-06 11:17 36 *****************
451 2024-04-06 11:18 37 ******************
... ..( 84 skipped). .. ******************
58 2024-04-06 12:43 37 ******************
59 2024-04-06 12:44 36 *****************
... ..( 33 skipped). .. *****************
93 2024-04-06 13:18 36 *****************
94 2024-04-06 13:19 37 ******************
... ..( 39 skipped). .. ******************
134 2024-04-06 13:59 37 ******************
135 2024-04-06 14:00 36 *****************
... ..( 17 skipped). .. *****************
153 2024-04-06 14:18 36 *****************
154 2024-04-06 14:19 33 **************
... ..( 3 skipped). .. **************
158 2024-04-06 14:23 33 **************
159 2024-04-06 14:24 ? -
160 2024-04-06 14:25 29 **********
... ..( 6 skipped). .. **********
167 2024-04-06 14:32 29 **********
168 2024-04-06 14:33 ? -
169 2024-04-06 14:34 27 ********
170 2024-04-06 14:35 27 ********
171 2024-04-06 14:36 28 *********
... ..( 21 skipped). .. *********
193 2024-04-06 14:58 28 *********
194 2024-04-06 14:59 29 **********
... ..( 8 skipped). .. **********
203 2024-04-06 15:08 29 **********
204 2024-04-06 15:09 30 ***********
... ..( 4 skipped). .. ***********
209 2024-04-06 15:14 30 ***********
210 2024-04-06 15:15 31 ************
... ..( 2 skipped). .. ************
213 2024-04-06 15:18 31 ************
214 2024-04-06 15:19 32 *************
... ..( 9 skipped). .. *************
224 2024-04-06 15:29 32 *************
225 2024-04-06 15:30 33 **************
... ..( 5 skipped). .. **************
231 2024-04-06 15:36 33 **************
232 2024-04-06 15:37 34 ***************
... ..( 9 skipped). .. ***************
242 2024-04-06 15:47 34 ***************
243 2024-04-06 15:48 35 ****************
... ..( 14 skipped). .. ****************
258 2024-04-06 16:03 35 ****************
259 2024-04-06 16:04 36 *****************
... ..( 28 skipped). .. *****************
288 2024-04-06 16:33 36 *****************
289 2024-04-06 16:34 37 ******************
... ..( 59 skipped). .. ******************
349 2024-04-06 17:34 37 ******************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 27744 Vendor specific