Feature:

1. 3.5mm Sound Jack: This radio transceiver utilizes a 3.5mm sound jack, so with the microphone plugged in, you can simply press and hold the right side button to place a call.
2. Multiple Voice Reception: This radio transceiver supports SSB, AM, Narrowband FM, Wideband FM voice reception with Spectrum Waterfall.
3. Catch And : This radio transceiver makes it very easy to catch and wireless signals from ISM band remotes.
4. Hardware Complete: This radio transceiver features a 3.2 inch resistive touchscreen, navigation switches, radio outputs, microphone inputs, DC 2.1 interface, and 4 layer gold plating.
5. Wide Application: This radio transceiver has a wide range of applications and can be used in ships, automobiles, electronic utility counters, transponder monitoring and so on.

Specification:

Item Type: Radio Transceiver
Material: Aluminum Alloy
Battery Type: 3.7V 2000mAh Lithium Battery x1 ( Shipped With Built In Battery )
Antenna Receiving Frequency Range: 1MHz-6GHz
Catch :
One of the best things about the radio transceiver is that it makes it very easy to catch and wireless signals from ISM band remotes.
Create a catch. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control.
Then stop recording to save it to the storage card.
Now you can go to the Playback menu, select the file you just recorded and click Play. The exact same signal will be transmitted over the air, effectively replacing your remote key.
TX Microphone:
Using the 3.5mm radio jack, the radio transceiver can also be used as a standard push to talk or voice activated walkie talkie radio by the radio transceiver. Plug the microphone into the radio jack, you simply press and hold the right button to push to talk.
If desired, you can also enable multiple CTCSS tone options, as well as tones that appear to be transmitted to the wireless headset
Receiver:
You can easily listen to standard NFM and WFM radio signals by connecting your speaker to the Portapack's 3.5mm radio jack.
ADS B reception is easily enabled on the radio transceiver by selecting the inductor and symbol in the upper right corner.
Hardware Configuration:
3.2 Inch, 240 x 320 RGB LCD With Resistive Touchscreen.
Navigation Switches
Radio Output
Microphone Input
DC 2.1 Connector
4 layer Gold Plating
HAVOC Features Include:
IQ File Playback
Microphone FM Transmission With CTCSS
CTCSS Decoder
Frequency Manager (Save And Load From Storage Card With Categories And Comments)
File Manager
Soundboard File Player (Holds 8 Bit Mono Files) Storage Card, Wav Directory)
ADS B Receiver With Map View
SSTV Transmitter
Fully Configurable Transmitter Signals
POCSAG Transmitter
POCSAG Receiver, Decoder
Morse Transmitter (FM Tone and CW)
OOK Transmitters for Common Remote Encoders (PT2262, Doorbells, Remote Outlets, Some Garages)
RDS (Radio Data System) PSN, RadioText and Time Group Transmitters
Weather Radio Sounder Receivers for M10 and M2K2
AFSK Receiver
AFSK Transmitter (Bell202)
Nuoptix DTMF Synchronization Transmitter
TouchTunes Jukebox Universal Remote Control
LCR (Language de Commande Routier) Message Generator
Street Lighting Control Transmitter (CCIR tones)
Play Dead for Emergencies
Fully Configurable RF Signal Generator
RSSI Radio Output for Pitch (for Direction Finding)
Features:
4 Way Buttons, Scroll Wheel and Selector Buttons.
Coin Cell Battery for Saving Settings and Date, Time.
Micro Storage Card Slot For Data And Code Storage
Micro Storage Card Slot For Data And Code Storage
SSB, AM, Narrowband FM, Wideband FM Radio Reception With Cascaded Spectrum.
Broadband (18MHz) Spectrum and Cascade Analysis.
Monitoring of Ships (AIS), Cars (TPMS), Electronic Utility Counter Transponders (ITRON ERT).
For mode runs for firmware for use with SDR host software.
Calibrates PPM for more accurate adjustments.
Sleep mode saves energy by turning off the display only.
Instructions:
When you place the PortaPack in for Mode, your will continue to work with the PC based SDR software.
The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems.

Package List:

1 x Full Featured Radio Transceiver

5 x Antenna

2 x Antenna Accessory

1 x USB Cable

1 x English Manual