Gibson EB BASS made in 2013
Description
GibsonEBBASS made in 2013
Series developed by Gibson in recent years
EBBASS is the base of the series developed by Gibson in recent years.
Ash body, maple neck, wood material with rose fingerboard.
Although it has an original body shape, it has a Gibson-like design.
A humbucker pickup with a thick low end and powerful bass sound.
Comes with original hard case.
Specs that mix tradition and innovation
The body is ash, the neck is maple, and the fingerboard is rosewood.
864mm scale, head is angled 2:2, neck joint is set neck.
The paint has a matte finish that gives you the feel of wood.
The bridge is made by BABICZ. With Babitz's bridge, the bottom of the bridge is in close contact with the entire plate, so there is little loss of vibration and long sustain is obtained.
Thick and powerful sound with clear mid-high range
The pickup is equipped with an original humbucker.
It's a thick and powerful sound. Compared to other Gobson base models, the mid-high range has a more contoured and loose feel,
Produces a practical sound even when slapping.
With the 2Vol and 1Tone controls, pull the Vol knob to turn on the coil tap function.
Produces a pseudo-single sound. There is no sudden change in volume even when tapping from hum to single.
Product condition
The condition is that the neck is almost straight.
There are scratches from use and dullness of the metal parts due to age.
There are no problems with operation or sound.
The strings are .045-.105 gauge and adjusted.
There is plenty of room to adjust the neck by tightening or loosening the rest of the rod.
The neck has been adjusted to be almost flat.
The string height is approximately 2.2 mm for the 1st string and approximately 2.6 mm for the 4th string at the 12th fret position.
Accessories include genuine hard case and adjustment wrench. Product and instruction manual are not included.
Please check the photo for the external condition.
Although it is possible to specify the gauge of guitar strings, we do not accept brand specifications or special gauge specifications.
We cannot accept requests for gauge or brand specifications for bass strings.
SPEC]
Body material: Ash
Neck material: maple
Neck shape: U
No neck warp
Fingerboard material rosewood 20F
String height: 12F treble-bass 2.2mm-2.6mm
Frets remaining: 90%
inlay dots
Nut material width approximately 40mm
Peg:GROVER
Scale 864mm
Bridge: BABICZ
String gauge used: .045-.105
Pickguard: Tortoiseshell pattern
Pickup: humbucker
switch:
Control: 2Vol PULL and coil tap, 1Tone
Rod remaining: There is plenty of room when loosened.
Weight: approx. 3.84kg
Accessories: Genuine hard case, adjustment wrench
Serial No.108531377
Store product code: df Q55677 A84BC480200 Case No.526
Color white
Manufacture year 2013
Number of strings: 4 strings
pickup passive
Pickup configuration: 2 humbucker types
Number of frets: 20 frets or less
neck scale long
Weight 3.84kg
Body material ash
Fingerboard material rosewood
neck joint set neck
Serial number 108531377
Accessories Hard case, adjustment wrench
Series developed by Gibson in recent years
EBBASS is the base of the series developed by Gibson in recent years.
Ash body, maple neck, wood material with rose fingerboard.
Although it has an original body shape, it has a Gibson-like design.
A humbucker pickup with a thick low end and powerful bass sound.
Comes with original hard case.
Specs that mix tradition and innovation
The body is ash, the neck is maple, and the fingerboard is rosewood.
864mm scale, head is angled 2:2, neck joint is set neck.
The paint has a matte finish that gives you the feel of wood.
The bridge is made by BABICZ. With Babitz's bridge, the bottom of the bridge is in close contact with the entire plate, so there is little loss of vibration and long sustain is obtained.
Thick and powerful sound with clear mid-high range
The pickup is equipped with an original humbucker.
It's a thick and powerful sound. Compared to other Gobson base models, the mid-high range has a more contoured and loose feel,
Produces a practical sound even when slapping.
With the 2Vol and 1Tone controls, pull the Vol knob to turn on the coil tap function.
Produces a pseudo-single sound. There is no sudden change in volume even when tapping from hum to single.
Product condition
The condition is that the neck is almost straight.
There are scratches from use and dullness of the metal parts due to age.
There are no problems with operation or sound.
The strings are .045-.105 gauge and adjusted.
There is plenty of room to adjust the neck by tightening or loosening the rest of the rod.
The neck has been adjusted to be almost flat.
The string height is approximately 2.2 mm for the 1st string and approximately 2.6 mm for the 4th string at the 12th fret position.
Accessories include genuine hard case and adjustment wrench. Product and instruction manual are not included.
Please check the photo for the external condition.
Although it is possible to specify the gauge of guitar strings, we do not accept brand specifications or special gauge specifications.
We cannot accept requests for gauge or brand specifications for bass strings.
SPEC]
Body material: Ash
Neck material: maple
Neck shape: U
No neck warp
Fingerboard material rosewood 20F
String height: 12F treble-bass 2.2mm-2.6mm
Frets remaining: 90%
inlay dots
Nut material width approximately 40mm
Peg:GROVER
Scale 864mm
Bridge: BABICZ
String gauge used: .045-.105
Pickguard: Tortoiseshell pattern
Pickup: humbucker
switch:
Control: 2Vol PULL and coil tap, 1Tone
Rod remaining: There is plenty of room when loosened.
Weight: approx. 3.84kg
Accessories: Genuine hard case, adjustment wrench
Serial No.108531377
Store product code: df Q55677 A84BC480200 Case No.526
Color white
Manufacture year 2013
Number of strings: 4 strings
pickup passive
Pickup configuration: 2 humbucker types
Number of frets: 20 frets or less
neck scale long
Weight 3.84kg
Body material ash
Fingerboard material rosewood
neck joint set neck
Serial number 108531377
Accessories Hard case, adjustment wrench