Gibson Flying V 67 MOD Classic White
Description
The 67 reissue is especially popular among the Flying V, which has been attracting a lot of attention lately.
It features a reproduced 1967 specification large pickguard.
The mahogany body neck and rosewood fingerboard provide a rich midrange with good balance and an attractive sharp attack.
There are some correction marks on the pickguard due to control knob expansion. Due to its expansion, the wood near the rear pickup cavity has been shaved.
The pickups have been replaced with Duncan SH6N and Duncan SH6B.
The two volume pots have been replaced with recent CTS, and the tone pot appears to be a genuine pot with the Gibson logo stamped on it.
There are weather checks, scratches, dents, and paint burns throughout.
There is no abnormality in the neck and the condition is good.
|B+
|
Serial number|90527719
Year of manufacture | 1997
Country of manufacture | USA
Case|Genuine hard case
Accessories |-
Weight | 3.57kg
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above 12th fret
Nut width | 43.0mm
Neck thickness around 1st fret |20.8mm
Neck thickness around 12th fret |21.9mm
Scale|628mm(24.75")
RADIUS|254mm(10")
Strings during setup | ERNIEBALL2221 .010-.046set
Changes |-
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment
Others|-
Manufacture year unknown
Serial number 90527719
It features a reproduced 1967 specification large pickguard.
The mahogany body neck and rosewood fingerboard provide a rich midrange with good balance and an attractive sharp attack.
There are some correction marks on the pickguard due to control knob expansion. Due to its expansion, the wood near the rear pickup cavity has been shaved.
The pickups have been replaced with Duncan SH6N and Duncan SH6B.
The two volume pots have been replaced with recent CTS, and the tone pot appears to be a genuine pot with the Gibson logo stamped on it.
There are weather checks, scratches, dents, and paint burns throughout.
There is no abnormality in the neck and the condition is good.
|B+
|
Serial number|90527719
Year of manufacture | 1997
Country of manufacture | USA
Case|Genuine hard case
Accessories |-
Weight | 3.57kg
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above 12th fret
Nut width | 43.0mm
Neck thickness around 1st fret |20.8mm
Neck thickness around 12th fret |21.9mm
Scale|628mm(24.75")
RADIUS|254mm(10")
Strings during setup | ERNIEBALL2221 .010-.046set
Changes |-
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment
Others|-
Manufacture year unknown
Serial number 90527719