KING SNAKE Small Acoustic Blues! Rockin Chair w P.U. ~Black~ #RC-033 1.88kg
Description
A highly toxic song that is closely related to the music cultivated in the wilderness.
A wonderful small full acoustic guitar named after Howlin' Wolf's masterpiece! It will ring!
It has a small body and is finished with an ultra-thin nitrocellulose lacquer that makes the wood conduits stand out.
It has a small body reminiscent of the so-called Gibson L-37 and early L-50, and is a model equipped with a pickup.
The pickup is also original for this model, and it sounds exactly like a cat! !
Makes me want to wear a ten-gallon hat!
!
~KINGSNAKE full aco features~
Ultra-thin nitrocellulose lacquer finish
The base material is nitrocellulose lacquer, which is also used on vintage guitars. By applying the ultra-thin coating, the wood conduits also stand out, directly transmitting the sound of the wood in the body and neck, stimulating the player's sensibilities!
Ultra lightweight body
KINGSNAKE's full aco models are all extremely lightweight, weighing between 2.1kg and 3kg.
You can experience the crispness and sharpness of the lightweight body.
Plywood top side back material
Maple, spruce, and maple 3-ply plywood are used for the top and side back materials. Strength has been improved.
-Quote-
************************************************** *********
Welcome to KINGSNAKE Guitars
"Dirty&Wildness"
BRANDCONCEPT Dirty, full aco.
Developed as a model specialized for Acoustic Blues. When you want to play the guitar leisurely in your room, or because music often involves solo music, select the small 13.5-inch size that tightens the low range so that the voice and guitar sound don't clash, and improve the separation between the voice and guitar sound. This makes it easier to hear both the voice and the guitar, allowing the full tones of both to be output. In addition, typical small guitars tend to lean towards the high range and lack middle and low range, but to avoid this, we use a single spruce top material and apply KINGSNAKE's proprietary Detroit One Block to improve the sound. The core has been increased, and the deep mahogany body with bluesy tone and flat back have increased the speed of the sound while being plump. Whether you play with your fingernails or use a pick to play vigorously, it is a skill that is good at separating sounds with a good response. Above all, the concept is that it is the perfect guitar for when you want to play guitar leisurely in your room, and the model name Rockin Chair comes from the subtitle of the Howlin' Wolf masterpiece.
A solid spruce top and DetroitOneBlock produce a lively sound.
Sharpness created by the combination of a thin 3.8mm top and back and a deep body.
The plywood top and back material is 5 ply of curly maple, spruce, maple, spruce, and curly maple. It is made as thin as possible without sacrificing the acoustic feel of deep copper. It has a thin finish to give the sound a quick start-up and a sharp, undulating feel when the volume is turned up during live performances. For example, the 175 from the 1950s has a total thickness of approximately 5mm, with maple approximately 1mm, spruce approximately 3mm, and maple approximately 1mm. By making it thinner than that, the response is different. Combined with this thinness and DetroitJazzBlock, it has a smooth attack like the T-Bone sound source.
Coexistence of sound thickness and playability with 13Fret joint
In order to make it easy to play even frequently used EKeyt songs, the thick sound of the 12Fret joint and the high playability of the 14Fret coexist. It also creates a well-balanced body shape.
Unique ultra-thin nitrocellulose lacquer finish
Nitrocellulose lacquer, similar to vintage guitars, is used for the base. Compared to the currently popular polyester, the coating can be finished with a thickness less than 1.3 mm, allowing the body to be constructed to suit each model, allowing the neck to resonate directly with the sound of the wood, giving it a wild and luxurious appearance. It gives the unique KINGSNAKE texture.
Deep mahogany sides and flat back create volume and speed.
By having the same body thickness and flat back as a single O-sized acoustic guitar, it gives the archtop mid-range feel, giving it a small but spacious feel and a good rise in sound.
Equipped with Original P.U. "KINGSNAKERC-1" developed for Rockinn'Chair
Although the body is small, the sound is developed to be thick and wild. Using a small body with a well-balanced size, we used Alnico V magnets to give it a P-90-like tone, and by winding as much thin AWG43 wire as possible within the space, we created a DC It has a sense of gain with a resistance value of 12K and a crisp sound close to the middle. In addition, it is possible to adjust the balance of the strings used by adjusting the height of each string's pole piece so that it can be used with bronze strings or electric strings.
~Spec~
TOPSolidSpruce
SIDE&BACKPlywood Mahogany
BODYWIDTH13.5"(343mm)
BODYDEPTH90mm
BRACINGParallelBracing
BINDINGSingleIvoroid(Body)
PICKGUARDTortoice
NECKMahogany
FINGERBOARDRosewood
RADIUS12 (305R)
SCALE243 4"(628mm)
NUTWIDTHBone 1.68 (42.67mm)
BRIDGERosewood
TAILPIECECustomTrapeeze-Style
TUNERGotoh
PICKUPSKINGSNAKERC-1
CONTROL1Vol.&1Tone
FINISH Lacquer
STRINGS012-.052
CASEHardshellCase White&BlackLine
Color black
Year of manufacture: 2024
pickup passive
Pickup configuration 1S
Number of frets: 20 frets or less
neck scale medium
Body material maple
No tremolo
Fingerboard material rosewood
neck joint set neck
Neck material mahogany
Accessories hard case,
A wonderful small full acoustic guitar named after Howlin' Wolf's masterpiece! It will ring!
It has a small body and is finished with an ultra-thin nitrocellulose lacquer that makes the wood conduits stand out.
It has a small body reminiscent of the so-called Gibson L-37 and early L-50, and is a model equipped with a pickup.
The pickup is also original for this model, and it sounds exactly like a cat! !
Makes me want to wear a ten-gallon hat!
!
~KINGSNAKE full aco features~
Ultra-thin nitrocellulose lacquer finish
The base material is nitrocellulose lacquer, which is also used on vintage guitars. By applying the ultra-thin coating, the wood conduits also stand out, directly transmitting the sound of the wood in the body and neck, stimulating the player's sensibilities!
Ultra lightweight body
KINGSNAKE's full aco models are all extremely lightweight, weighing between 2.1kg and 3kg.
You can experience the crispness and sharpness of the lightweight body.
Plywood top side back material
Maple, spruce, and maple 3-ply plywood are used for the top and side back materials. Strength has been improved.
-Quote-
************************************************** *********
Welcome to KINGSNAKE Guitars
"Dirty&Wildness"
BRANDCONCEPT Dirty, full aco.
Developed as a model specialized for Acoustic Blues. When you want to play the guitar leisurely in your room, or because music often involves solo music, select the small 13.5-inch size that tightens the low range so that the voice and guitar sound don't clash, and improve the separation between the voice and guitar sound. This makes it easier to hear both the voice and the guitar, allowing the full tones of both to be output. In addition, typical small guitars tend to lean towards the high range and lack middle and low range, but to avoid this, we use a single spruce top material and apply KINGSNAKE's proprietary Detroit One Block to improve the sound. The core has been increased, and the deep mahogany body with bluesy tone and flat back have increased the speed of the sound while being plump. Whether you play with your fingernails or use a pick to play vigorously, it is a skill that is good at separating sounds with a good response. Above all, the concept is that it is the perfect guitar for when you want to play guitar leisurely in your room, and the model name Rockin Chair comes from the subtitle of the Howlin' Wolf masterpiece.
A solid spruce top and DetroitOneBlock produce a lively sound.
Sharpness created by the combination of a thin 3.8mm top and back and a deep body.
The plywood top and back material is 5 ply of curly maple, spruce, maple, spruce, and curly maple. It is made as thin as possible without sacrificing the acoustic feel of deep copper. It has a thin finish to give the sound a quick start-up and a sharp, undulating feel when the volume is turned up during live performances. For example, the 175 from the 1950s has a total thickness of approximately 5mm, with maple approximately 1mm, spruce approximately 3mm, and maple approximately 1mm. By making it thinner than that, the response is different. Combined with this thinness and DetroitJazzBlock, it has a smooth attack like the T-Bone sound source.
Coexistence of sound thickness and playability with 13Fret joint
In order to make it easy to play even frequently used EKeyt songs, the thick sound of the 12Fret joint and the high playability of the 14Fret coexist. It also creates a well-balanced body shape.
Unique ultra-thin nitrocellulose lacquer finish
Nitrocellulose lacquer, similar to vintage guitars, is used for the base. Compared to the currently popular polyester, the coating can be finished with a thickness less than 1.3 mm, allowing the body to be constructed to suit each model, allowing the neck to resonate directly with the sound of the wood, giving it a wild and luxurious appearance. It gives the unique KINGSNAKE texture.
Deep mahogany sides and flat back create volume and speed.
By having the same body thickness and flat back as a single O-sized acoustic guitar, it gives the archtop mid-range feel, giving it a small but spacious feel and a good rise in sound.
Equipped with Original P.U. "KINGSNAKERC-1" developed for Rockinn'Chair
Although the body is small, the sound is developed to be thick and wild. Using a small body with a well-balanced size, we used Alnico V magnets to give it a P-90-like tone, and by winding as much thin AWG43 wire as possible within the space, we created a DC It has a sense of gain with a resistance value of 12K and a crisp sound close to the middle. In addition, it is possible to adjust the balance of the strings used by adjusting the height of each string's pole piece so that it can be used with bronze strings or electric strings.
~Spec~
TOPSolidSpruce
SIDE&BACKPlywood Mahogany
BODYWIDTH13.5"(343mm)
BODYDEPTH90mm
BRACINGParallelBracing
BINDINGSingleIvoroid(Body)
PICKGUARDTortoice
NECKMahogany
FINGERBOARDRosewood
RADIUS12 (305R)
SCALE243 4"(628mm)
NUTWIDTHBone 1.68 (42.67mm)
BRIDGERosewood
TAILPIECECustomTrapeeze-Style
TUNERGotoh
PICKUPSKINGSNAKERC-1
CONTROL1Vol.&1Tone
FINISH Lacquer
STRINGS012-.052
CASEHardshellCase White&BlackLine
Color black
Year of manufacture: 2024
pickup passive
Pickup configuration 1S
Number of frets: 20 frets or less
neck scale medium
Body material maple
No tremolo
Fingerboard material rosewood
neck joint set neck
Neck material mahogany
Accessories hard case,
** This product is brand new item.
Many product images are sample photos, so the serial number and grain may differ from the actual product you receive. **