Description:

The high and low level controller can be used in conjunction with the non-contact liquid level sensor, and can also be used with other liquid level sensors, such as float ball.

When the liquid level is too low, the liquid level sensor sends out the low level alarm signal, and the pump starts automatically and adds liquid level. On the contrary, the pump stops automatically when the liquid level is too high. In this way, the function of automatic control of liquid level of container is realized.

Feature:

1>. Strong compatibility, can be used in conjunction with a variety of liquid level sensor

2>. Strong tection, with waterof pump idling tection and water level overflow detection output, with 4 hours overtime pumping alarm

3>. Relay dry node output, can be applied to a variety of load control

4>. Control of diversification, manual or automatic mode control of water pump

5>. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed

Parameter:

Function:

1>. Water level automatic control: water level is lower than the low position induction be, automatically start the pump, the water level rises to high level, and automatically closes the pump

2>. Idling delay pump: after starting, if the water supply pipe is detected without water, then delay 3-5 minutes to close the pump. During the pumping cess, if the water flow stopped for more than 3 seconds, the pump was closed immediately

3>. Automatic tracking water source: after idling pump stop, start pumping once every two hours, until the water is full, pump stops

4>. Manual automatic switching: press K1 button to switch mode of work, red light to automatic mode, kill mode is manual mode

5>. Non contact inductive be: durable be, strong anti-interference ability, sensitive induction, no contact with liquid, corrosion resistance, safety, environmental tection and no pollution.

Package：

1x level controller