Epiphone Limited Edition 1958 Korina Explorer
Description
Explorer model manufactured in 2016 using Korina wood.
The serial number is 2017, but this device was released in 2016, and the logo on the back of the head is also a 2016 specification.
It has a relatively lightweight finish, typical of Korina, and features a better sound than mahogany.
After we receive the item, we have cleaned it, replaced the strings, adjusted the rod, adjusted the octave, and adjusted the string height, so it is in good playing condition.
There are dents with paint cracks on the lower part of the body top and on the back of the body.
There is some plating loss and dullness on the gold parts, and there are small scratches overall, but there are no corner scratches typical of deformed kiters, and it is in good condition.
Year of manufacture
Made in 2017
truss rod
There is plenty of room
fret
60 70
accessories
Soft case non-genuine
weight
3.50kg
serial
1703200791
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above the 12th fret
Nut width | 43.0mm
Neck thickness around 1st fret |21.3mm
Neck thickness around 12th fret |23.1mm
Scale|628mm(24.75")
RADIUS|305mm(12")
Strings during setup | ERNIEBALL2221 .010-.046set
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year 2017
Weight 3.50kg
Serial number 1703200791
Accessories soft case,
The serial number is 2017, but this device was released in 2016, and the logo on the back of the head is also a 2016 specification.
It has a relatively lightweight finish, typical of Korina, and features a better sound than mahogany.
After we receive the item, we have cleaned it, replaced the strings, adjusted the rod, adjusted the octave, and adjusted the string height, so it is in good playing condition.
There are dents with paint cracks on the lower part of the body top and on the back of the body.
There is some plating loss and dullness on the gold parts, and there are small scratches overall, but there are no corner scratches typical of deformed kiters, and it is in good condition.
Year of manufacture
Made in 2017
truss rod
There is plenty of room
fret
60 70
accessories
Soft case non-genuine
weight
3.50kg
serial
1703200791
Truss rod | No problem The rod has been checked up to 60 degrees left and right and there is no problem.
Frets remaining | No problems Sufficient fret height
String height (bass string side) | 2.0mm above the 12th fret
String height (treble string side) | 1.5mm above the 12th fret
Nut width | 43.0mm
Neck thickness around 1st fret |21.3mm
Neck thickness around 12th fret |23.1mm
Scale|628mm(24.75")
RADIUS|305mm(12")
Strings during setup | ERNIEBALL2221 .010-.046set
Repair Maintenance points | Cleaning String replacement Rod adjustment Octave adjustment String height adjustment
The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Manufacture year 2017
Weight 3.50kg
Serial number 1703200791
Accessories soft case,