Wilckens 750 ml boat & yacht varnish

 

• Resin base

• Transparent

• Weather resistant

• Fast drying

• Seawater & weatherproof

• For outside & inside

 

Description

This one-component special paint fills well, is abrasion-resistant and resistant to sea and river water. A high quality paint job. Hard-wearing, step- and shock-resistant, productive, gloss-stable, permanently resistant to yellowing and excellent for use indoors and outdoors above the waterline.

 

Lightfastness

Very good

 

Weather resistance

Weather resistant

 

compatibility

Can be mixed with Allen synthetic resin colored varnishes.

 

Purpose of use

Finest boat paint for the interior and exterior of wooden boats above the waterline.

 

Processing tips

The product is ready for processing. When processing, the object should be at most lukewarm. This promotes optimal flow of the product. During commissioning, an odor may develop for a short time. To remedy this, set the radiator to the highest level and ventilate well with the window fully open. Rust spots must be removed thoroughly. When processing several containers, ensure that the batches are the same. Stir well before use and apply evenly in a thin layer.

 

Paint structure and application technology

The surface must be clean, dry, free of grease and stable. Remove loose and unstable paint parts. Old wax and varnish residues must be completely removed. Sand old coatings well (wear a dust mask). Air, object and material temperature: at least +5°C. Please note the waiting time between individual coats. Stir well before use and apply evenly in a thin layer. When processing several containers, ensure that the batches are the same.

1. Paint structure on wood, inside and outside

Please note the waiting time between each coat! Every 24 hours, carefully sand the paint (300 grit sandpaper) using a dust mask.

a) Prepare the substrate accordingly

b) 1 to 2 base coats diluted approximately 50% with white spirit

c) 1. Intermediate coat diluted approximately 30% with white spirit

d) 2. Intermediate coat diluted approximately 15% with white spirit

e) Apply 1 to 2 undiluted top coats in a thin layer

2. Paint build-up on old paint or renovation paint

a) Prepare the substrate accordingly

b) 1 to 2 coats of this product undiluted

 

fertility

Approximately 9 m²/l for one coat, depending on the nature/absorbency of the surface.

 

Diluent

Turpentine substitute.

 

Tool

Brush with natural bristles, roller.

 

Cleaning the tools

Clean immediately after use with white spirit, universal thinner or brush cleaner.

 

Drying (at +20°C, 65% relative humidity)

Dry as dust: after about 5 hours

Grip-tight: after about 12 hours

Reworkable: after about 24 hours

Lower temperatures and higher humidity extend the drying time.

 

ingredients

Alkyd resin, oil, aliphatic solvents, additives.

 

VOC content

This product is not subject to the VOC decoration directive!

 

WGK

1

 

GISBAU code

BSL40

 

Danger and safety information

Please refer to the safety data sheet for information on hazards and safety precautions.

The product is ready for processing. When processing, the object should be at most lukewarm. This promotes optimal flow of the product. During commissioning, an odor may develop for a short time. To remedy this, set the radiator to the highest level and ventilate well with the window fully open. Rust spots must be removed thoroughly. When processing several containers, ensure that the batches are the same. Stir well before use and apply evenly in a thin layer. The surface must be clean, dry, free of grease and stable. Remove loose and unstable paint parts. Old wax and varnish residues must be completely removed. Sand old coatings well (wear a dust mask). Air, object and material temperature: at least +5°C. Please note the waiting time between individual coats. Stir well before use and appl