"FIBER OPTIC 6 PACK SUPER VALUE MODEL LIGHTING KIT"

This is over $100 value!!

.

.

.

> Add lights to all your projects the EZ way with fiber optic lighting.

.

This auction is for everything you see in the picture above and in the description below.

.

"FREE SHIPPING" Buy 2 or more items and pay shipping only on 1 item. You get free shipping on all additional items.

.

****If you would like to buy this item now using the "BUY IT NOW" please click on "Visit store" or "See other items" above. You will find this item there with a "Buy it now" so no need to wait.

.

Here's what you get: 6 packs of end glow fiber optic fiber (300 feet of .25mm, 200 feet of .50mm, 100 feet of .75mm, 50 feet of 1.0mm, 24 feet of 1.5mm and 12 feet of 2.0mm). You also get 6 Bright white illuminators, 6 9v battery connectors, 6 toggle switches, 8 feet of extra hook up wire, 10 mini 4 inch cable ties and 8 inches of heat shrink tubing.

.

Six packs of clear end glow fiber optic fiber fiber. 1 pack each: 300 feet of .25mm, 200 feet of .50mm, 100 feet of .75mm, 50 feet of 1.0mm, 24 feet of 1.5mm and 12 feet of 2.0mm. Each pack is 1 long continuious fiber so you can cut it to the sizes you need.

.

Six standard size fiber optic Micro illuminators. These have a bright white LED in them with a built in resistor that lets you use any DC power source between 3 volts and 18 volts. These are very easy to install on your models and projects. There is a US penny in the picture for size comparison. These are what lights up your fiber optic fibers. The black fiber guide tube on the end is approximately 1 inch long by 1/4 inch wide. The over all length is 8.75 inches long. You can use them with as few or as many fibers that you can fit in the tube.

.

Six 9 volt battery connectors. These make it easy to use a 9 volt battery to light up your illuminators/fiber. These are high quality hard plastic and not the cheap vinyl type that break easy. These are appoximately 6.25 inches long.

.

Six mini switches. These switches are awesome and super easy to install. Soldering is always best but not necessary with these switches or any of these components. These switches have holes in the terminals so you can thread your red wire (positive)on the illuminator into one terminal and the red wire (positive) on the battery connector to into the other terminal and twist them tight. Then twist the 2 black wires together. Cover the bare wires with heat shrink tubing or tape and you are all set.

.

8 feet of extra hook up wire. This lets you make your wires longer if you need to. It makes it easy to set up your battery in a remote location. Ten mini 4 inch cable ties. These let you easily secure your wires or fibers optics. 8 inches of Heat Shrink Tubing. This is a easy way to cover your bare wires to prevent then from touching other wires or bare metal to prevent a short circuit.

.

.

ITEM OVERVIEW:

This kit is perfect for the Scale model builder. Fiber optic lighting gives you a super easy way to add just the right size lights to your projects. This kit gives you enough items to make 6 seporate circuits and lets you add lights to 6 or more models or projects. All componets of this kit are designed to be connected WITHOUT solder.

.

If purchased seporately these items would cost over $100.00

6 packs of fiber optic fiber: $10.99 each 6x = $65.94

Illuminators: $4.29 each or $2.99 each for 4 or more 6x = $17.94

9v battery connectors: $1.39 each or $1.19 each for 4 or more 6x = $7.14

Switches: $1.39 each or $1.19 each for 4 or more 6x = $7.14

Hook up wire: 14 cents a foot 8x = $1.12

Mini cable ties: 5 cents each 10x = $0.50

Heat Shrink Tubing: 6 cents per inch 8x = $0.48

Total Value = $100.26

*If you need extras of any of these items please let me know. They are availble for the prices above. Some items may come with an extra free bonus. Also you can swap any of these items for any other items I have that are of equal or lesser value.

.

.

Please check my other auctions for more fiber optic sizes and related items.

.

All my fiber optic fiber is state of the art high quality optical plastic, end glow, fiber optic fiber. Not the older glass type filament which requires polishing and is very hard to work with!

.

Please check my other auctions for the following items and more!

450 feet of clear .50mm diameter fiber 4"

300 feet of clear .25mm diameter fiber

250 feet of clear pre-cut various length fiber

150 feet of colored .25mm fiber

200 feet of clear .50mm diameter fiber

150 feet of colored .50mm fiber

100 feet of clear .75mm diameter fiber

50 feet of clear 1.0mm diameter fiber

24 feet of clear 1.5mm fiber

12 feet of clear 2.0mm fiber

Fiber Optic illuminator lighting kits

2mm, 3mm and 5mm Neon Glow fiber

Fiber sizes compared to a US penny

.

MODEL RAILROAD LAYOUTS! These fiber optic fiber light strands make it super easy to add great looking and dramatic lighting to your model rail road scenery! They are very easy to install and fun to work with! You can transform your model RR Layout into an Enchanted, Magical Wonderland when the sun goes down and you turn on these lights! Watch your layout come alive with lights!!



MODEL SHIPS, MODEL SPACESHIPS, MODEL CARS, DIORAMA LIGHTING, STAR CEILINGS and MORE! Fiber optic fiber is the best and easiest way to add lighting to all your modeling projects. In boat models add realistic looking port holes all lighting up different colors next to each other from one white LED illuminator. Add value and interest. Make them unique, one of a kind and make them come alive with lights!

Now You can add fiber optic lighting to your projects for a fraction of what you would pay at a Hobby Shop or Crafts Store!

BUILD YOUR DREAMS AND MAKE THEM COME ALIVE WITH LIGHTS!!

HOW THEY WORK:

Simply put, when light goes in one end of the fiber it comes out the other end! You can place any type of light like a tiny flashlight bulb, L.E.D. or Christmas tree bulb near one end of the fibers and the other ends will all light up! You can light up 100"s or even 1,000's of fibers with just one tiny light bulb or use a micro illuminator! The easiest way to light up your fiber optic fibers is to use a super bright, MICRO ILLUMINATOR OR ILLUMINATOR LIGHTING KIT. (SEE MY OTHER RELATED ITEMS)! These fiber optics light up super bright, they are super easy to install and look fantastic!!

There is "NO" soldering to do, "NO" wiring to mess with and "NO" special knowledge is required to install and use them! These are so easy to use and UNLIKE other types of fiber optic fiber this fiber requires "NO POLISHING"!

They can be cut easy to the size you need with a razor blade or scissors! It's very easy to make bigger and brighter lights by bundling several fibers together. You can make their tips bigger and brighter by heating the fiber tips with a flame. The fiber tips will expand up to 4 times their size! When you do this the tips will act as magnifying or projector lens increasing their brightness tremendously!

COMPLETE INSTRUCTIONS INCLUDED!!

  • The instructions contains the following info:
  • 1. Making 4 types of illuminators. (EZ, fast and inexpensive to make)
  • 2. Cutting your fibers. (No Polishing Required)
  • 3. Adding/changing colors. (Light your fiber up in a rainbow of colors)
  • 4. Splice your fibers super easy. (No special tools required)
  • 5. Glues and tape.
  • 6. Drilling holes. (Making your own micro size drill bits EZ)
  • 7. Expanding/enlarging the fiber tips. (Making a light magnifying tip EZ)
  • 8. Special lighting techniques.
  • 9. Lighting up a model Rail Road Layout.
  • 10. Lighting up scale models.
  • 11. Making a star field model/diorama background.
  • 12. Installing a star ceiling in your home.
  • 13. General fiber optic info.
  • And more!

Ideas for their use: Anywhere on your RR layout, Model, Diorama or Art project you could use little lights! Add lights to all your houses and buildings, street lighting and on billboards. Add lighting to your landscapes and scenery and make it come alive with lights! Limited only by your imagination! There are thousands of uses for these. They do not transmit any heat at all, only light!

More Ideas

  • Add a little magic to all your craft projects and make them come alive with light!
  • Make your own fiber optic lamps!
  • Use them to customize or accent your home or bedroom decor!
  • Add some twinkly little lights to your Floral arrangements!
  • Make your own unique work of art!
  • They are fun and easy to use anywhere!

.

This auction is for 1 "Fiber Optic 6 Pack Super Value Model Lighting Kit".

.

.

Please check out my other auctions for Neon Glow fiber.

<

.

.

.

.

International buyers are very welcome! I'll be happy to combine shipping when you buy more than one of my items so you pay $0.00 for each additional item I can send with this order.

.

Thank you very much for your purchase!

If you have any questions please don't hesitate to email me.