``'70S JAZZ BASS'' brings together the characteristics of JAZZ BASS from the 1970s, when music was expanding in a variety of ways. Fingerboard with neck binding and block inlays,
It has a gorgeous 70's look such as the "Bullet" truss rod and traditional logo, and the rear pickup closer to the bridge produces a tight and bright sound.
There are small scratches and dents.
The neck is in good playing condition with no abnormalities.
・Pickup: Vinyl wire type
*The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center. Due to reasons such as humidity and temperature during the in-store display period or during product transportation, the actual values may not be the same as those listed when delivered.
Product rank: B+: There are some scratches, but there are no problems in normal use.
Serial number:MX13381308
Year of manufacture: 2013
Country of manufacture: Mexico
Case: Non-genuine hard case
accessories:-
Weight: 4.09kg
Truss rod: [No problem] The rod has been checked up to 60 degrees left and right and there is no problem.
Remaining frets: [No problem] Sufficient fret height
String height (bass string side): 2.5mm above the 12th fret
String height (treble string side): 2.0mm above the 12th fret
Nut width: 37.5mm
Neck thickness (near the 1st fret): 22.0mm
Neck thickness (near the 12th fret): 25.3mm
Scale: 864mm (34")
RADIUS:184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
changes:-
Repair/maintenance points: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
others:-