Explanation
Product Introduction
Genuine Meter Replacement Type Multi-Function Meter Super Multi Dn Meter This Is A Multimeter That Can Be Installed Without Any Wiring Work By Simply Replacing The Genuine Meter. Equipped With Many Functions Such As Speed, Rotation Speed, Gear Position, Temperature Gauge, Fuel Gauge, Time, Battery Voltage Display, Tire Outer Diameter Correction, Backlight Color Change, Etc.!! Also, Since It Has Almost The Same Shape And Can Be Installed In The Same Position As The Genuine Meter, You Can Use The Exterior Accessories (Screen, Etc.) That Were Installed At The Same Time As The Genuine Meter. Basic Functions For Monkey 125 (Speed/Temperature Unit, Genuine Tire Circumference, Ignition Setting, Fuel) Are Preset.
Please Check Before Purchasing Lot Will Be Displayed When The Connector Is Inserted Into The Super Multi Dn Body. For Models That Are Displayed As R-0, R-1, Or R-2, Prepare The Parts According To The Instructions Below. When Installing At The Same Time As Our Company'S Blaze Turn Signal Set (Applicable Product Number 05-08-0465 05-08-0466 05-08-0467), Please Purchase Separately The Wide Range Flasher Relay (3-Pole Noiseless Type) Product Number 05-08-0433. Purchase Required. If You Use The Wide Range Flasher Relay That Comes With The Blaze Turn Signal, The Indicator Lamp For The Turn Signal May Not Light Up Properly. Models Marked R-3 Can Be Installed With Our Wide Range Relays, Both 2-Pole And 3-Pole.
Notes It Cannot Be Installed At The Same Time As H.I.D. Or Other Manufacturers' Led Headlights Or Fog Lights. Some Ballasts/Inverters (Voltage Converters) Emit High Voltage Noise That Adversely Affects Digital Circuits, Causing Product Failure Or Malfunction.
Regarding Gear Position Settings To Set The Gear Position, Both The Speed Signal And Engine Revolution Signal Must Be Input To The Super Multi Dn Meter. Therefore, It Is Necessary To Perform Automatic Reading By Actual Driving. Do Not Set The Gear Position In Urban Areas, As There Are Many Traffic Lights And Traffic, Which Can Be Dangerous. When Driving, Please Choose A Road With Good Visibility, Check The Surrounding Road Conditions, And Proceed With Caution. The Gear Position Display Is Switched Based On Speed And Rotational Speed. When Stopped, The Display Will Not Change Even If You Operate The Gear Change.
Precautions For Use
It Cannot Be Installed At The Same Time As H.I.D. Or Other Manufacturers' Led Headlights Or Fog Lights. Some Ballasts/Inverters (Voltage Converters) Emit High Voltage Noise That Adversely Affects Digital Circuits, Causing Product Failure Or Malfunction. Regarding Setting The Gear Position To Set The Gear Position, Both The Speed Signal And Engine Rotation Signal Must Be Input To The Super Multi Dn Meter. Therefore, It Is Necessary To Perform Automatic Reading By Actual Driving. Do Not Set The Gear Position In Urban Areas, As There Are Many Traffic Lights And Traffic, Which Can Be Dangerous. When Driving, Please Choose A Road With Good Visibility, Check The Surrounding Road Conditions, And Proceed With Caution.

This Is A Multimeter That Can Be Installed Without Any Wiring Work By Simply Replacing The Genuine Meter.

Compatible Models: Monkey 125 (Jb02-1000001) (Jb03-1000001~) Monkey 125 Thai Model (Mlhjb02/Mlhjb03)