USA-made PACER from the early 1980s has arrived.
The head logo is designed from 1978 to 1984, but there is no model name written under the logo, which is often seen in this era.
It is equipped with rotomatic type pegs, but there is no evidence that they have been replaced and they appear to be original, but depending on the model year, some models have Schaller stamps, so the logo and pegs are in transition. It seems to be a unique specification.
The pickup is made by Schaller and has the original specifications, but due to a defective tone pot, it has been replaced with a new one.
The Kramer was loved by many HR/HM guitarists in the 80's, and the satin finish and rounded C-shaped neck has a very nice feel, making it feel like it has the potential to support technical phrases and flashy riff work. Masu.
There are scattered small scratches and dents throughout, and there are paint spots on some parts of the top of the body.
The controls have been modified to 1 volume/1 tone, the pot where the rear volume was located has been removed, and the hole has been filled in with tape from inside the cavity.
The bridge is equipped with the original German-made Floyd Rose, but the arm housing has been replaced with a recent plug-in type (there are original parts, but the nylon washers have been damaged due to deterioration).
Although each part has been maintained and cleaned at our repair center, the neck was originally jointed in an off-center state, so there may be cases where the first string falls off at the high fret.
The included hard case is oversized, so cushioning material is required inside the case when transporting it.

Product Details
Truss rod: There is plenty of room in the tightening/loosening direction
Frets: about 60% to 70%
String height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 40.8mm
Neck thickness (near the 1st fret): 20.9mm
Neck thickness (near the 12th fret): 24.2mm
Scale: 648mm (25.5")
RADIUS:241mm (9.5")
Strings at setup: D'Addario EXL120 / .009-.042 set
Year of manufacture: 1980s
Country of manufacture: USA
Case: Hard case/non-genuine
Accessories: Arm, original parts
Serial number: C5556
Weight: 4.52kg
Product rank: B+: There are some scratches, but there is no problem in normal use.
Repair/maintenance points: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret alignment, wiring correction, screw hole correction
changes:-