Fender Custom Shop American Custom Telecaster NOS Fingerboard Charcoal Frost Metallic Rosewood 2024
Description
2024 custom shop made roasted maple neck with front ham tele!
The base model is 60ECUSTOM, but it is a model that incorporates various custom shop-like specifications at each point.
The body is charcoal frost metallic, which is a rare color, but it is made of 2pcs ash, and the outer binding is only on the top. The finish is lacquer.
The neck is made of 2A grade Birdseye Maple and is further roasted to achieve outstanding strength and sound. The fingerboard is jet black AAA grade rosewood. The fingerboard surface has a compound radius of 9.5-12 inches. The frets are 6105 size, so-called NarrowTall size. The neck shape is 60s style OvalC, a classic style that has few curls and a high position that gives you a sense of full thickness. The neck heel is also cut to allow for a smooth approach in high positions.
The front PU is equipped with Duncan SH-55nSethLover. Named after Seth Lover, the developer of the original PAF, it features a clean sound with low DC resistance and a sweet high end. The rear PU is equipped with a hand-wound Texas SpecialTele like a custom shop. It gives a solid sense of power and matches perfectly with the subdued front PU.
The control pot is also a stack-mounted DualStackHSE, which is ideal for using the front ham 500k and rear single 250k separately. Please check it out if you are a wiring enthusiast. The bridge is '58-'63TeleBridgewithRSDSaddles. Although the plate is traditional, the intonation of the saddle is controlled by RSD, which solves the problem while maintaining the traditional look. In addition, it uses lock-type pegs that allow for quick string changes, and the strap pin uses a Jim Dunlop strap lock from the time of shipment, so it can be used immediately!
Condition with little signs of use, just scratches. The pickguard still has the protective tape on it. This content is also recommended for those who are considering purchasing a new product.
The neck condition is fine, and the truss rod can be adjusted to tighten or loosen, and can still be adjusted to tighten. There are no string marks on the frets, and the rest is about 90%. Currently, the string height is adjusted to approximately 2.0mm on the 12F 6th string side and approximately 1.5mm on the 1st string side.
Weight 3.70kg
Neck condition: No problems
Truss rod: Can be adjusted in the tightening direction or loosening direction, and can be further adjusted in the tightening direction.
Approximately 90% frets remaining
Country of origin: Made in USA
Case genuine hard case
Accessories: Certificate, spec sheet, strap, strap lock
Beauty products. There are small scratches
Serial number 13363
Manufacture year unknown
Weight 3.70kg
Serial number 13363
Accessories Hard case
The base model is 60ECUSTOM, but it is a model that incorporates various custom shop-like specifications at each point.
The body is charcoal frost metallic, which is a rare color, but it is made of 2pcs ash, and the outer binding is only on the top. The finish is lacquer.
The neck is made of 2A grade Birdseye Maple and is further roasted to achieve outstanding strength and sound. The fingerboard is jet black AAA grade rosewood. The fingerboard surface has a compound radius of 9.5-12 inches. The frets are 6105 size, so-called NarrowTall size. The neck shape is 60s style OvalC, a classic style that has few curls and a high position that gives you a sense of full thickness. The neck heel is also cut to allow for a smooth approach in high positions.
The front PU is equipped with Duncan SH-55nSethLover. Named after Seth Lover, the developer of the original PAF, it features a clean sound with low DC resistance and a sweet high end. The rear PU is equipped with a hand-wound Texas SpecialTele like a custom shop. It gives a solid sense of power and matches perfectly with the subdued front PU.
The control pot is also a stack-mounted DualStackHSE, which is ideal for using the front ham 500k and rear single 250k separately. Please check it out if you are a wiring enthusiast. The bridge is '58-'63TeleBridgewithRSDSaddles. Although the plate is traditional, the intonation of the saddle is controlled by RSD, which solves the problem while maintaining the traditional look. In addition, it uses lock-type pegs that allow for quick string changes, and the strap pin uses a Jim Dunlop strap lock from the time of shipment, so it can be used immediately!
Condition with little signs of use, just scratches. The pickguard still has the protective tape on it. This content is also recommended for those who are considering purchasing a new product.
The neck condition is fine, and the truss rod can be adjusted to tighten or loosen, and can still be adjusted to tighten. There are no string marks on the frets, and the rest is about 90%. Currently, the string height is adjusted to approximately 2.0mm on the 12F 6th string side and approximately 1.5mm on the 1st string side.
Weight 3.70kg
Neck condition: No problems
Truss rod: Can be adjusted in the tightening direction or loosening direction, and can be further adjusted in the tightening direction.
Approximately 90% frets remaining
Country of origin: Made in USA
Case genuine hard case
Accessories: Certificate, spec sheet, strap, strap lock
Beauty products. There are small scratches
Serial number 13363
Manufacture year unknown
Weight 3.70kg
Serial number 13363
Accessories Hard case