1st-4th variant

Tension:3.0 - 3.2 / 24mA
Lamp typeGUIDED
Socket typeN/A

ApplicationRound tip super bright emitting diode

Light-emitting color: white, green, yellow, red, blue.
Light intensity: 10000-12000mcd
Long lifetime
Low energy consumption
Lead soldering temperature: 240° C (< 5 sec.)
Operating temperature: -25°C ~ +85°C
Size: 8mm / 5mm /3mm / 1.8mm with 2 pins each

Tips: If the LED does not light, turn the bulb 180 degrees
If an error code or hyper flashing occurs, it means you need to add proper resistors


-----
5th-6th variant

High-power 1W LEDs on a star heatsink or without heatsink.


-Quantity: 1,10 or 50 LEDs selectable
-Color: white, blue, red, green or yellow selectable
-very energy efficient
-High quality chip mounted on an aluminum heatsink/or without
-Our LEDs have a very long lifespan. Checked again when sending.


power  Color    color temperature    volt        MAX   LM
1w         white       6000-6500K 3.2-3.4V350mA   100-110lm
1w         red 620-625nm         2.0-2.2V350mA  40-50LM
1w         blue        455-460nm         3.2-3.4V350mA  25-30LM
1w         green       520-525nm         3.2-3.4V350mA  70-80LM
1w         yellow       590-592nm         2.0-2.2V350mA  40-50LM

-----

7th variant - 5050 SMD LED

Light color: cold white, blue, red, green or yellow
- Opening angle: wide beam
- Intensity: approx. 4500 mcd
- Voltage: max. 3.6V
- Type: 5050 (3 light chips in one SMD)
- LED dimensions: 5.5x5.0x1.95mm (LxWxH)
- Cathodes (-) on the slanted side of the housing

8. Variant 0805 SMD LED
Color   intensity* Opening angle * Operating voltage * Operating current * Dimensions
Red            150 mcd     120°  1.9 - 2.5V            20mA2.0 x 1.2 x 0.8mm
White    330 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm
Blue    130 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm
white 700 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm


Legal notice

Interior lighting is permitted in the STVO without a separate identifier or ABE. For legal reasons, we are obliged to point out that LED lamps are not permitted outdoors under the STVO.

We expressly point out that all names mentioned here are legally protected and we only use these names to be able to describe the product in more detail and better.

If an error code or hyper flashing occurs, it means you need to add proper resistors Color   intensity* Opening angle * Operating voltage * Operating current * Dimensions Red            150 mcd     120°  1.9 - 2.5V            20mA2.0 x 1.2 x 0.8mm White    330 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm Blue    130 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm white 700 mcd     120°  2.8 - 3.6V            20mA2.0 x 1.2 x 0.8mm Interior lighting is permitted in the STVO without a separate identifier or ABE. For legal reasons, we are obliged to point out that LED lamps are not permitted outdoors under the STVO. We expressly point out that all names mentioned here are legally protected and we only use these names to be able to describe the product in more detail and