Top 5 Reasons to Get Newest XPROGV6.12: New Generation Hardware, runs more steady and faster than oldversion. Latest software version: V6.12 ,Firmware V5.4 Language: English Operating system: WinXP/Win7/Win8 Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9 AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)
Q:What is the different between this V6.12 version and v5.84,v5.74?
A:Xprog V6.12Added Aauthorized: AUTH-0028-3 Renesas RL78 Authorized AUTH-0028-4 Renesas M32C Authorized
Added 4 Adapters: ADP-0019 Rev.B ADP-0006 M35080 ICP adapter QFP64 MC908AZ/AS60 3K85K adapter QO18S714
It improve the PCB performance.
XPROG V6.12 using tips: 1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle. 2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software. 3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged . 4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid. 5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid
Install Notice: Please windows system required as below: 1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well... 2.The windows system should be with at lest 2 partitions (except the CD ROM.)
3.Can not be working with virtual harddisk.
Install Steps Manual: 1.Click the file "installation.reg", get the file information to theregedit. 2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start. 3.Plug the Xprog main interface to the computer, install the USB driver. 4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.
XPROG V6.12 Authorizations: AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory) AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM) AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass se c urity authorization(allows to read/write se c ured EEPROM and flash memory) AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 BMW EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory) AUTH-0010 MB ZGS001 authorization AUTH-0011 Motorola HC11EA9/E9 bypass se curity authorization (allows to bypassse curity bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size) AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass se curity authorization(allows to read/write se cured EEPROM and flash memory) AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM) AUTH-0021 ARM (Micronas, ...) Family bypass se curity authorization (allows toread/write se cured and non-sec ured internal flash and external serial EEPROM,view /change mileage, Chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SE C URITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13 AUTH-0027-1HC(S)908 update Authorized 2016/3/13 AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13 AUTH-0028-1Renesas V850 Authorized 2017/10/9 AUTH-0028-2Renesas SuperH Authorized 2017/10/9 AUTH-0028-3Renesas RL78 Authorized ---New! AUTH-0028-4Renesas M32C Authorized ---New! XPROG-M V6.12 Adapters included: ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 Motorola HC05B/X PLCC52 programming adapter ADP-0005 Motorola HC05B/X QFP64 programming adapter ADP-0006 ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass se c urityadapter Additional adaptor for 5M48H P-FlashADP-0019Rev.A EWS3 adaptor EEPROM adaptor QFP28 adaptor QFP64 adaptor QFP80 adaptor QFP112 adaptor QFP144 adaptor
Package List: 1 x XPROG-Box Hardware (Aluminum Enclosure) 1 x USB Cable 1 x 16Pin cable 1 x CD with XPROG-Box Software (V6.12) 19 x Adapters Set |