We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fitment
BUICK ALLURE 2005-2009
BUICK LACROSSE 2005-2009
BUICK LUCERNE 2006-2008
BUICK REGAL 1996-2004
CHEVROLET IMPALA 2000-2005
CHEVROLET LUMINA 1998-1999
CHEVROLET MONTE CARLO 1998-2005
OLDSMOBILE INTRIGUE 1998-1999
PONTIAC GRAND PRIX 1997-2008
3.8L Engines Only
Item Description
Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease.
Clear marks on the rod promise easy-to-read oil levels
O-ring seals the top of the dipstick, prohibiting oil from escaping
Application-specific direct replacement for proper fit
Brightly-colored handle makes the dipstick easy to locate under the hood
Adjustable | No |
Gasket or Seal Included | Yes |
Handle Material | Polybutylene Terephthalate (pbt) |
Length (In) | 21 In. |
Material | Steel |
Tube Included | No |
Part Number | 917300 12574823 |
How To Use
As with the original Dealer Tool
Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself.
Remove and check fluid level
DO NOT leave tool inside =
the dip stick tube when finished with level check.
This Tool Enables The User To Check Engine Fluid Level
1. Verify that the vehicle is parked on a level surface.
2. Remove dipstick tube cap.
3. Engage parking brake. Start engine and let it idle with gear selector in the park position.
4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding.
5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into Engine fill tube until itbottoms out against the Engine pan and puil out, read fluid levell.
NOTE: The dipstick will protrude from fil tube when insalled.
6. Check Engine fluid temperature using a scan tool.
NOTE: Accurate Engine fluid temperature can only be obtained by using a scan too with the Engine leverinreverse or any forward gear position.
7. The Engine dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle.
8. Adjust fluid level as necessary and recheck level.
9. Install dipstick tube cap after checking fluid level.
Item Specifics | |
---|---|
Brand | Ewaymotor |
Manufacturer Part Number | EW160271A01 |
Custom Bundle | No |
Warranty | 1 Year |
Fitment Type | Direct Replacement |
Gasket or Seal Included | Yes |
Tube Included | No |
Modified Item | No |
Length | 20.085 In |
Adjustable | No |
Placement on Vehicle | Front,Left,Right |
Type | Dipstick |
Handle Material | PBT Plastic |
Material | Stainless Steel |
Total Length | 21" |
Interchange Part Number | 917300 |
Other Part Number | 12574823 |
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Dipstick Engine Oil Level For 2005-2009 Buick Allure Lacrosse Lucerne Regal 3.8L
Fitment BUICK ALLURE 2005-2009
Item Description Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease. Clear marks on the rod promise easy-to-read oil levels
How To Use As with the original Dealer Tool Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself. Remove and check fluid level DO NOT leave tool inside = the dip stick tube when finished with level check.
This Tool Enables The User To Check Engine Fluid Level 1. Verify that the vehicle is parked on a level surface. 2. Remove dipstick tube cap. 3. Engage parking brake. Start engine and let it idle with gear selector in the park position. 4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding. 5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into Engine fill tube until itbottoms out against the Engine pan and puil out, read fluid levell. NOTE: The dipstick will protrude from fil tube when insalled. 6. Check Engine fluid temperature using a scan tool. NOTE: Accurate Engine fluid temperature can only be obtained by using a scan too with the Engine leverinreverse or any forward gear position. 7. The Engine dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle. 8. Adjust fluid level as necessary and recheck level. 9. Install dipstick tube cap after checking fluid level.
1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
3.Local pick up is not available.
4.Orders Will be shipped out from our warehouse in US.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by abuse or wrong operation is not covered by this warranty.
9,No product liability insurance is assumed.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com. 1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
All rights reserved. |