THE GENE SIMMONS PUNISHER
Description
THEGENESIMMONSPUNISHER
Kiss Gene Simmons limited edition autographed model
KISS, a pioneering American hard rock band
This is the signature model of KISS bassist Gene Simmons.
It is handmade by Mr. Gene, and is not a manufacturer's product, but a signature model that is exactly the same as the one used by Mr. Gene himself.
Some are manufactured by B.Crich, but the most famous model is Cort. This is an entry model because it is bolt-on, but this one with the title seems to have the same specifications as the original.
One with the same specs as the person himself
Since there are almost no materials on the market, we can only confirm the actual item.
Body and neck are maple through neck
It seems that alder is used for the wings.
The fingerboard uses rosewood
Approximately 864 scale 24 fret specification.
The nut uses a brass nut with the same specifications as the person himself.
Gene's signature is on the body, and the serial number is handwritten on the back of the head.
The pickup is equipped with an active type PJ type EMG pickup.
A powerful split coil pickup with a loud feel and a single coil pickup with an edgy and sharp sound can be used in a variety of genres.
The control is a 3-way toggle switch with 1 volume and 1 tone.
Great as a collector's item or used in actual combat!
The condition is that the neck is flat.
There are small scratches, dents, and dullness of parts due to use.
The pegs have been replaced with ones of the same model.
There is pain near the strap pin.
The nut groove of the brass nut has been increased. Does not affect the sound
The string height is 12F4 string approximately 2.7mm, 1st string approximately 2.2mm.
The truss rod has plenty of room in both tightening and loosening directions.
The frets are about 80% thick and there are no parts that are low.
There is no chatter, no sound jamming, etc.
Please check the photo for the external condition.
SPEC
Body material Maple Alder? wing
Neck material Maple through neck
Neck shape C
No neck warp
Fingerboard material rosewood 24F
String treble treble-bass 2.2-2.7
8 frets left
inlay original
Nut width approx. 39mm
peg original
Scale approximately 864mm
bridge original
String gauge used: .045-.105
Pickguard -
Pickup EMG PJType
Switch 3way toggle switch
Control 1Vol 1tone
Rod margin I squeezed it a little when adjusting, but there is plenty of room for both tightening and loosening.
Weight 4.0
Accessories: hard case, damaged original peg, adjustment wrench
serial
00320
Store product code: df Management number: Q54394 A7C7D175800 Case No.296
Color sunburst
Number of strings: 4 strings
pickup active
Pickup configuration PJ type
Number of frets: 24 frets
neck scale long
Weight 4.00kg
Body material maple
Fingerboard material rosewood
Neck joint through neck
Serial number #00320
Accessories: hard case, damaged original peg, adjustment wrench
Kiss Gene Simmons limited edition autographed model
KISS, a pioneering American hard rock band
This is the signature model of KISS bassist Gene Simmons.
It is handmade by Mr. Gene, and is not a manufacturer's product, but a signature model that is exactly the same as the one used by Mr. Gene himself.
Some are manufactured by B.Crich, but the most famous model is Cort. This is an entry model because it is bolt-on, but this one with the title seems to have the same specifications as the original.
One with the same specs as the person himself
Since there are almost no materials on the market, we can only confirm the actual item.
Body and neck are maple through neck
It seems that alder is used for the wings.
The fingerboard uses rosewood
Approximately 864 scale 24 fret specification.
The nut uses a brass nut with the same specifications as the person himself.
Gene's signature is on the body, and the serial number is handwritten on the back of the head.
The pickup is equipped with an active type PJ type EMG pickup.
A powerful split coil pickup with a loud feel and a single coil pickup with an edgy and sharp sound can be used in a variety of genres.
The control is a 3-way toggle switch with 1 volume and 1 tone.
Great as a collector's item or used in actual combat!
The condition is that the neck is flat.
There are small scratches, dents, and dullness of parts due to use.
The pegs have been replaced with ones of the same model.
There is pain near the strap pin.
The nut groove of the brass nut has been increased. Does not affect the sound
The string height is 12F4 string approximately 2.7mm, 1st string approximately 2.2mm.
The truss rod has plenty of room in both tightening and loosening directions.
The frets are about 80% thick and there are no parts that are low.
There is no chatter, no sound jamming, etc.
Please check the photo for the external condition.
SPEC
Body material Maple Alder? wing
Neck material Maple through neck
Neck shape C
No neck warp
Fingerboard material rosewood 24F
String treble treble-bass 2.2-2.7
8 frets left
inlay original
Nut width approx. 39mm
peg original
Scale approximately 864mm
bridge original
String gauge used: .045-.105
Pickguard -
Pickup EMG PJType
Switch 3way toggle switch
Control 1Vol 1tone
Rod margin I squeezed it a little when adjusting, but there is plenty of room for both tightening and loosening.
Weight 4.0
Accessories: hard case, damaged original peg, adjustment wrench
serial
00320
Store product code: df Management number: Q54394 A7C7D175800 Case No.296
Color sunburst
Number of strings: 4 strings
pickup active
Pickup configuration PJ type
Number of frets: 24 frets
neck scale long
Weight 4.00kg
Body material maple
Fingerboard material rosewood
Neck joint through neck
Serial number #00320
Accessories: hard case, damaged original peg, adjustment wrench