1. Description


 

This 5in+1out & 5out + 1in Bidirectional 3G SDI TX&RX BOX are fiber optic serial digital video transmission units that offer the industry's broadest range of digital rates 3Gbps bandwidth while maintaining the signal quality that broadcasters demand. The Transmitter and Receiver support 2 discrete Gigabit Ethernet Ports


The transmitter accepts a 75ohm BNC input and converts it into an optical stream via a standard ST connector.


The transmitter BNC include equalization and reclocker for long lengths of coaxial cable, so you can use them at nearly any point in your SDI chain.


The receiver unit reconverts the uncompressed signal back to BNC output.


The receiver include reclocker and cable driver for long lengths of optical link, use our SFP module, support range 80KM/3Gbps MAX. fiber transfer, so you can use them at nearly any point in your SDI chain.


Both the transmitter and receiver modules include LED indicators to display Power On, SDI signal presence. The units use AC 100-120V power supply


2. Feature

  • Supports SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) Serial Digital Video Standards
  • Supports 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 Gbps Serial Data Rate Operation
  • Supports DVB-ASI at 270 Mbps
  • Input Cable Equalization 3G:100m, HD-SDI:150m SD-SDI:300m/Belden 1694A
  • Output Cable Reach 3G:100m, HD-SDI:150m SD-SDI:300m/Belden 1694A
  • Supports embedded audio
  • 75ohm BNC input and output port
  • Support  5+1 Bidirectional 3G/HD/SD SDI
  • Support Gigabit Ethernet, and auto sensing 10M/100M/1000Mbps bitrate
  • ST Fiber Receptacle
  • Up to 20km distance / Singlemode Fiber default
  • Maximum distance up to 80 km/ Singlemode Fiber
  • Operating Temp.: -20 to 60 Degree Celsius
  • AC 100-120V power supply



3. Specifications


　DescriptionParameterTest Conditions
BNC



SMPTE StandardTK WFM2300
BNC75 OHMAgilent System
Date Rate 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 GbpsTK WFM2300
StandartSMPTE 424M, SMPTE 292M, and SMPTE 259M (C) ,DVB-ASITK WFM2300
Cable Equalization 3G:100m, HD-SDI:150m SD-SDI:300mBelden 1694A
Cable Out Reach3G:100m, HD-SDI:150m SD-SDI:300mBelden 1694A
Jitter<0.2UI2.97 Gbps
Eye OvershootAmplitude<10%2.97 Gbps
Rise/Fall time130-800psSD,HD,3G Signal

Fiber

SFP Bandwidth3GbpsAgilent System
SFP Support8channel CWDM Band 1270-1610nm　
Fiber ReceptacleST Port　
Fiber Distance20km DefaultSinglemode/G652D
Maxmium Fiber Distance80km Singlemode/G652D/Long Wave Band
Fiber TypeSinglemode　
Others



Input Power100-120V AC　
Power Consumption60W　
Power Surge ProtectYES　
Operating Temp.-20to 60　
Storage Temp.-40 to 85　
Operating Humidity20-80%　
Weight8KG　
Dimmension1U: L/W/H 483*210*45mm; Small box: L/W/H 220*220*70mm　
Warranty3 Years Free Warranty　




4. Package List

  • (1PCS B For Truck Side) 1U RACK BOX 5IN+1OUT Bidirectional  3G-SDI (Option 4IN+2OUT Bidirectional 3G-SDI)

  • (2PCS A For Field side) Small BOX 5OUT+1IN Bidirectional 3G-SDI Receiver *1 (Option 4OUT+2IN Bidirectional 3G-SDI)

  • 1U RACK BOX Discrete Side Ear*2 and Screws


5. Installation



  1. Connect the provided DC or AC power supplies to the power socket of the transmitter and receiver

  2. Connect SDI cable between the SDI video source and the transmitter BNC input

  3. Connect SDI cable between the receiver BNC output and the SDI video monitor or SDI DVR

  4. Connect ST fiber between the transmitter and the receiver ST Receptacle



6. Notes


 


A. No video output and some one of the three LEDs not lighted

  • Please check the power supply if work

  • please check the video source if work

  • please check the coaxial cable BNCs if all tightened well

  • please check the ST fiber if inserted well


B. There is video display, but video flash

  • please check the video source format if right

  • please check the coaxial cable BNCs if all tightened well

  • please check the ST fiber if inserted well

  • this issue happens often when the ST end face is dirty

  • For long range application, please check the fiber transfer link-budget, if it is too long, the received optical signal is very weak, and may be out of receiver reclocker capacity and fail to recover the useful signals



7. Warranty



Thank you very much for using our products


       The warranty time is three years and life-long maintenance. During this period, any belongs to under normal usage circumstance cause because of the product quality’s problem of breakdown, our company will be responsible for giving free maintain


 

Free maintain won’t be given under the following circumstance:

  • The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration

  • The damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damage

  • The product malfunction caused by not in accordance with the user manual operation

  • The malfunction and damaged caused by the other barriers(man-made factors or external device)