Electronic Thermostat for incubator 12v power supply. Can be used only with Heater up to 3А/220V or 110V AC
Easy to follow wire diagram and instruction!
Only need adapter from 220V AC, or 125V AC to 12V DC
Item Description
This thermostat can be used for making Home incubator, for an Aquarium thermostat, thermostat for Floor heating system and more appliance.
Technical data:
1. Voltage - 12 v DC
2. Temperature range: from 20 0C to 80 oC
3. Control accuracy - 0.1 C
4. Triac Output : 3А/125V DC
3A/250V AC
Plate dimensions - 57x32 mm.
Length of wires on probe - 50 cm, can be extended up to 1.5 m.
Note: The thermostat not work with DC Heaters.
Electronic Thermostat for incubator 500 w Heater 220V, with electronic switching element
Item Description
This electronic thermostat is very precisely and have electronic switching element.
1. Voltage : 220-240 v AC
2. Temperature range + 20 0C to +80 0C
3. Control accuracy - 0.2 C
4. Output (heater)- up to 500w 220V, can be increased by attaching heating sink
5. Heater voltage - 220-240V AC
6. Plate dimensions - 9 x 2.6 x 2.7 cm.
7. Length of wire on probe - 100 cm - can be extended to 1.5M
Device have one red led diode for indicating working heater.
Need to be connected wires for power supply, heater and fan, on terminals on the picture
Temperature is adjusted with small insulate screwdriver.
Please note that thermostat is not galvanic insulated from the mains power. I'ts strongly recommended to not touch it with hands when it is power on.
ALARM DIGITAL INCUBATOR THERMOSTAT HATCHING EGGS 85-256V
Item Description
Voltage - from 85 to 260V AC
- Temperature range: +35 0C to +40 0C
- Control accuracy: 0.1 C
- Heater - up to 800w, 4A
- Length of wire of probe - 150 cm
- Length of wire of alarm - 15 cm, can be extended.
- Have led diode for:
= indicate working heater
= +40C - when temperature reach up to +40C
Need to be connected wires for heater, power and fan on terminals.
No need additional thermometer - current Temperature is displayed on thermostat.