Plastic Bulkhead Fittings

These fittings enable you to fit an outlet to your tank. All of the fittings give you a standard BSP thread to enable you to fit a valve or a hose tail fitting.

Items in the drop down menu are as follows:

If you are unable to get inside the tank to fit the outlet you can still fit these bulkhead fittings the opposite way round. By drilling the hole and linking your lid to the outlet with a piece of string and then dropping the fitting through and fitting the outlet with the back nut on the outside. Don't forget this then gives you the male BSP size. Also if you are doing it this way round the washer will need to be on the inside of the tank.
  • 2 inch BSP female outlet - back nut is required on the outside of the tank. 
    • This fitting has an american thread which the nut screws on to tighten. It turns the opposite way to usual threads so that when it is fitted and something is screwed into the female thread it can not be undone if overtightened. 
  • 1 inch BSP male outlet - back nut is required on the outside of the tank.
    • Like the above fitting you can fit this outlet by drilling the hole and linking your lid to the outlet with a piece of string and then dropping the fitting through and fitting the outlet with the back nut on the outside. Also if you are doing it this way round the washer will need to be on the inside of the tank.

Regarding what size hole to drill just measure the inside diameter of the washer and drill the hole the same size as this.

Buy with confidence from an established company. We offer a money back guarantee too.

If you have any queries or if you are still unsure whether your IBC outlet is suitable send me an e-mail or call us now on 01594 833308 and speak to one of our sales experts - ask for either myself, Gary, Malcolm or Ray who will be happy to help.

Best regards

Neil

Smiths of the Forest of Dean Ltd 
The Orchard, Station Road, Milkwall, Coleford, Gloucestershire,  GL16 8PZ  Telephone: 01594 833308   

Company No: 03759872