Five 7.5cm x 17.5cm vinyl strips for use in repairing pool and spa liners, covers, and inflatables that have sprung a leak!
These easy to use, no mess peel & stick strips can be applied above or under water.
Patches can be cut to fit minor holes, or linked together for larger tears. With its clear colour this patch is good for any coloured liner or inflatable; repair without anyone noticing!
Instructions:
Under water repairs... any size hole
*Clean area thoroughly where repair is to be made
*Remove paper backing, place over hole, and PRESS DOWN FIRMLY.
Inflatable Vinyl Items
*This material is suitable for repairing pinholes and small punctures in inflatable items.
*Clean area thoroughly where repair is to be made.
*Remove paper backing, place over hole and PRESS DOWN FIRMLY.
*Do not inflate for 30 minutes
*Bond improves for several hours
Non-Inflatable Items
*Clean area thoroughly where repair is to be made
*Remove paper backing, place over hole and PRESS DOWN FIRMLY.
If your Peel & Patch does not stick please check for the following:
1.Thoroughly clean the area before applying. Make sure there is no dust, grime etc -just because an area looks clean, it may not be clean. This also applies for underwater repairs where there may be a layer of salt or chlorine on the bottom of the pool that prevents the patch from sticking.
2.When cleaning the area, make sure you do not use a non-stick solvent or cleaner. If your patch fails, use a different cleaning agent to eliminate this as a cause.
3.To get an airtight seal, the patch needs to fix onto a flat surface.The patch will therefore not work effectively over a surface where there is stitching, dimpling or ridges as the seal is not air tight.
4.Your liner may have a non-stick component[highly unusual-but does happen].
5.Allow time for your patch to adhere