Seal Selection Help

• Check your measurements and then choose the most suitable seal from the seals shown. Ensure you select a seal suitable for your glass thickness. 
  
  
• Select the correct seal code from the dropdown bar at the top of the page and then pick the length in the second dropdown box from a 25mm sample or 800mm (0.8M) length. The seals are also available in 900mm (0.9M) lengths on listing 271427678510 /  2000mm (2M) lengths on listing 284220584555 and some selective seals in 2500mm (2.5M) lengths on listing 284221809314
  
  
• We would advise using a seal with a fin or bubble roughly 2-5mm bigger than your maximum gap. If your gap varies please remember this may make the fin a little tight at the smaller gap end but you can always cut the fin back slightly with scissors if needed. 
  
  
• Some seals shown on this listing have rigid fins or deflectors. Please see the listing gallery for technical drawings of each seal which show which parts are rigid and which parts are soft on each seal if you are not sure. 
  
  
• If your seal passes over a threshold or upstand we would advise you not to a select a seal with a fin height any bigger than the gap between the bottom of the glass and top of the threshold and upstand
  
  
• If you are unsure which seal to order you can post us a small piece of your old seal and we will try to match it for you.  
  
  Fitting Help

• Simply remove your old seal and clean the glass. Starting at the most awkward point to access push the seal on to the glass an inch or so at a time. Do not try to slide the seals on to the glass as this may result in damage. No lubricant or glue should be needed but you may find installation is made easier by warming the seal slightly in warm water or with a hair dryer first.
  
  Other Information
  
  
• These seals are sold straight and as sold are suitable for straight doors only. If you would like one of these seals for a curved door please contact us as we can quote to curve selective ones to order for you. This listing shows one design of seal, many other designs are available in our Ebay shop which you can view here:- Shower-Seal-UK-Ltd Ebay Shop 
  
  
• These seals are normally used on the bottom of shower screens, although can be used anywhere that requires a seal either horizontally or vertically

• If necessary the new seal can be cut to size with secateurs, a hacksaw or sharp knife.

• Strong, durable and easy to install.

• No DIY knowledge necessary.

• Available in any quantity for bulk orders.