INTAKE MANIFOLD LINKAGE ARMS for
Audi and Volkswagen
**Two pieces set **
The best-selling manifold link arms for Audi and the most cost-effective
If your vehicle has a broken link arm in the variable intake manifold system - a common problem due to the poor quality of the material used in the O.E.M. part – this listing offers you the most economical and reliable solution and is backed by a LIFETIME WARRANTY.
The Difference is in the Material Used:
These parts are made of DELRIN®/DuPond™ (a high-performance engineering polymer used in precision parts requiring high stiffness, low friction and excellent dimensional stability) used in industries for automobiles, planes, boats, aerospace, etc. It is a common replacement for metal in many applications such as gears, pulleys, impellers, etc.
Able to withstand 9,000 psi tensile strength and 3,500 psi compressive strength, it is more than 350 times the working force that have to withstand in the engine
Important Note about part compatibility:
Depending on the assembly plant where your Audi or VW was
manufactured, the same exact model/year car may need a short (1
inch) or a long (2 inch) link arm.
Please make sure you are ordering the correct size link arm by
measuring your current link arm, or asking your mechanic or car dealer.
The dimension is an estimate distance from center
to center of the concave half-spheres of the link arm.
Please check the right size before buying
You can use the pictures like reference for identifying the
right size for your engine
Please remember is your commitment to know
which is the right part for your vehicle before purchase
Be Advised: There are metal link arms on the market, not originally designed for this use, which will damage other parts of the system and will cost you more in the long run. Metal link arms at lower price points are not treated/polished properly which causes them to corrode the ball joints to which they attach and will end up causing you to buy an entire new kit.
The mechanism where link arms operate is subject to high temperatures and continuous movement. These conditions will quickly wear-off any lubrication which will cause the link arm to act as a file and will quickly erode the ball joint to which the link arm is attached.
Due to the wear of the metal, the ball joint will shrink in size, causing the link arm to fall out. After the ball joint has worn down because of the metal, your only option will be to buy a whole new kit; including the diaphragm, pivot lever and link arm, which the manufacturer sells for more than $400.
Key Characteristics:
High mechanical strength and rigidity
Able to withstand 9,000 psi tensile strength and 3,500 psi compressive strength, it is more than 350 times the working forces that have to withstand in the engine
Toughness and high resistance to repeated impacts
Long-term fatigue endurance
Excellent resistance to moisture, gasoline, solvents, and many other chemicals
Good resilience and resistance to creep
Natural lubricity
Wide end-use temperature range (-100f to 300f)
Good electrical insulating characteristics
***LIFETIME WARRANTY***
Typically, the O.E.M. part is not sold alone – car dealers only sell it in a kit (P/N 077198327a) which costs around $400 per side (most cars require replacement on both sides, totaling in $800!!!)
This listing is for a 2-piece set of “short” nominal 1" (for reference proposes only) intake manifold linkage arms – Part #AVW1312 (see pictures). Both sides can be replaced with a single set.
Please determine if your car has the long (2”) or short (1”)
manifold link arms before purchase
In case you need the long (nominal 2") arm, please visit my other listing:
INTAKE MANIFOLD LINKAGE ARMS FOR AUDI AND VOLKSWAGEN Long 2"
SBD PART #AVW1322 (2") or eBay item number: 271411620765
*** LIFETIME WARRANTY ***
The installation is fast and easy, simply remove the damaged part (you may need a screwdriver or pliers) and snap the end links of the new part onto the actuators. That is all!
With over 18 years of experience manufacturing parts and machines for industries, R&D Laboratories and QC Laboratories; Selmi Bros. Design, Inc. has manufactured this product under strict quality control standards and each piece is individually tested before packaging.
In case you need the long (nominal 2") arm, please visit my other listing:
INTAKE MANIFOLD LINKAGE ARMS
FOR AUDI AND VOLKSWAGEN LONG 2"
SBD PART #AVW1322 (2")
FAST SHIPPING
99% SAME DAY SHIPPING !
Some Feedback received:
(We have sold to customers in over 12 countries on 4 continents)
Good quality product that has greatly improved the performance of my car now | Buyer: |
Great product at a great price | Buyer: |
PERFECT FIT BARGAIN THANKS | Buyer: |
Great alternative to original part, really tough plastic, #1 | Buyer: |
The item was great. Fast delivery. Ever so lovely packaging. | Buyer: |
Great parts hope to do business again | Buyer: |
We ordered the part Friday night and received the part Monday! Very fast service | Buyer: |
Super ebayer immer wieder (Germany) | Buyer: |
хороший товар и продавец (Russian) | Buyer: |
Awesome!!! Put them on the car today! | Buyer: |
Item is exactly as described and works, would buy from again. | Buyer: |
Gracias! Servicio extra rápido! Thanks! Ultra fast service! | Buyer: |