For more information on International Shipping Please see below For USA and Canada Delivery Confirmation Included |
Difference between Tag Gun Needles | |||||
![]() | ![]() | ![]() | ![]() | ||
Standard
| Long Neck | Extra Long Neck | FINE | ||
Standard Long Neck Extra Long Neck Fine Total Needle Length (A) : 31mm 39 mm 49 mm 26 mm Total Shaft Length (B) : 22 mm 28 mm 38 mm 13.5 mm Needle Shank Length (C) : 11 mm 11 mm 11 mm 12.5 mm Needle Shaft Diameter (D) : 2 mm 2 mm 2 mm 1 mm Maximum Thickness of Fabric (E) : 9 mm 16 mm 25 mm 7 mm For above detail description Please check all Photos. Standard C121 Needles:Recommended Tag Guns: Regular Goldstar, Regular Dennision or any regular tag guns. These needles will not work with any fine Tag Guns. Standard C141 Long Neck Needles: Recommended Tag Guns: Arrow 9L or any regular LONG NECK tag guns.These needles will not work with any fine Tag Guns. Standard C142 Extra Long Neck Needles: Recommended Tag Guns: Arrow 9EL or any regular tag guns.These needles will not work with any fine Tag Guns. Fine D191 Needles Recommended Tag Guns: Arrow 9F, Any fine tag guns from Dennison , Patriot , Mark , Freedom, Goldstar. any other brand fine tag guns. These needles will not work with any Standard Tag Guns. If you need Only different types of Tag Guns, Please Click Here If you need only different types of Barbs, Please Click Here We have Famous Combo 1 Standard Tag Gun + Extra Needle + 1000 Barbs of Your Choice, Please Click Here If you want to see all Listing related to Tag Guns , Please Click Here |
Useful Information |
Differences Between Tag Guns: Tag guns are classified into two types mainly based on the type of tag pin it uses, which could be either standard tag pin or fine tag pin. Fine Fabric and Standard barbs and needles are not interchangeable. You can only use fine fabric barbs and needles in fine fabric tools and use Standard (Regular) barbs and needles in standard tagging guns
Important: All tagging tools put a small hole in the fabric, so it is best to always test the fabric by putting the barb ( fastener) in an inconspicuous spot on the garment or simply put your barb through the size tag on the garment.
Standard Tag Gun: Standard tagging guns are used for general purpose like tagging on garments such Stuffed animals, Pillows, jeans, sweaters, sweatshirts, "T" shirts and products made from heavier nylons. The maximum thickness that a standard tag gun needle will tag completely less than 1/2" (about 10mm). To see more details and Buy Click Here What types of Standard Tag Pins can be used in Arrow 9S Standard Tag Gun (Pricing Gun)?There are different types of tag fasteners which may be used in a standard tag gun: standard tag pin, standard hook tag pin, Standard ring tag pin, Standard V tag pin etc. LONG NEEDLE AND EXTRA LONG NEEDLE TAG GUNS for items need long and strong Needle to go through like Pillows. Stuffed animal. There are different types of tag fasteners which may be used in a standard tag gun: standard tag pin, standard hook tag pin, Standard ring tag pin, Standard V tag pin etc. To see more detail and Buy Click Here Fine Tag Gun:Fine fabric price tag guns are used for the more delicate fabrics,but can also be used for tagging stuffed animals, sweatshirts, "T" shirts ect. The needle on the fine fabric tagging tools are approximately 50% smaller in diameter and about 1/4" shorter.The maximum thickness a fine fabric tool will tag completly throught is 1/4". To see more detail and Buy Click Here ![]() If you need more combinations and Fine Tag Guns, Please Click Here |
Differences Between Regular, Fine and Micro Barbs: Regular Standard Barbs: These are little think in shape. Normally 50 Barbs Per Clip. Fine Barbs: They are more delicate and thin. Normally 50 Barbs per Clip. Micro Standard and Fine Barbs:Very thin Barbs hard to see on the Stuff. Normally 100 Barbs per clips. If you need more combinations and different types of BARBS, Please Click Here |
How to Use Tag Gun and Precautions! Always use caution when tagging as tag gun needle are extremely sharp and can cause serious injury ! Protective leather gloves can help reduce the chance of being stuck with a needle.
Always replace the needle guard when you a finished tagging !
Gently push the "T" end of the fastener clip into the "T" slot in the top of the tagging tool as far as it will go.
Remove the plastic cover on the needle then squeeze the trigger to make sure the barbs are feeding through the tag gun properly. If the barbs do not feed, push down on the clip with a slight bit of pressure and sqeeze the trigger at the same time.
Place a price tag over the needle then work the needle into the fabric until the tag and the fabric are pushed up agaist the front of the tag gun. Then simply squeeze the trigger, pull the tag gun away from the garment to withdraw the needle and to pull the barb from the other barbs on the clip.
We like to stress squeezing the trigger as opposed to jerking the trig. If the tag gun starts to jam....... 1. Stop pulling the trigger !! Trying to force a jammed barb through a needle will damage your tag gun and render it useless! 2. Remove the needle and pull the barb out the back side of the needle. 3. Put the needle back into the tag gun or replace with a new one.
To remove and install the needle: 1. Place the needle guard over the needle or use a pair of leather glove to grasp the needle. 2. Turn the needle lock with the end of the lever pointing toward the front of the tool. 3. Slide the needle out of the tool . 4. Insert the needle with the long slot on the needle running parallel to the slot in the tool. 5. Once the needle is in place, turn the needle lock the end of the needle lock is facing toward the back of the tool. If lock does not turn you may not have the needle pushed in enough or you may need to turn the needle slightly. |
Store Policy
How to use Tag Gun
International Shipping
Request
All orders are shipped within 1 business days. We ship through USPS First Class Mail (With delivery confirmation number for USA only) Return Policy If you are not completely satisfied with the products, You can simply return within 5 business days and items should be in ORIGINAL CONDITION. Buyers are responsible for all return shipping.;We accept partial items for partial refunds.; International buyers are responsible for any custom charges or other taxes of their countries
Please Do not leave Negative Feedback, If you are not satisfied, just let us know and we will try our best to
resolve
the issue as Positive feedback keep running our business.Just send us a message and see how beautifully we resolve your issue. Thanks..
|