Introduction:
Five OBD cable adapters to allow additional diagnostic options for Italian cars. These include ENGINE, ABS, POWER STEERING and CAN ECU's.
Specification:
Green Adapter Lead (Adapter 1) = Engine, ABS, Power Steering, (usually)
Red Adapter Lead (Adapter 2) = Airbag, (usually)
Yellow Adapter Lead (Adapter 3) = CAN, (usually)
Purple Adapter Lead (Adapter 4) =Hood & newer models, (usually)
Blue Adapter Lead (Adapter 5) = Newer models, (usually)
Pin Configurations:
Green Adapter Lead = Female pin 7 to male pins 1,7,9,12.
Red Adapter Lead = Female pin 7 to male pin 3
Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12
Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13
Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11
Additional Items Required:
An ELM or KKL (VAG COM) diagnostic cable to connect to these adapters.
Software (free or full version).
Other Details:
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.
Some models may require the full version of the software to communicate with some ECUs.